Health hazard of poorly regulated exposure during manufacture of cemented tungsten carbides and cobalt.

نویسندگان

  • J H Auchincloss
  • J L Abraham
  • R Gilbert
  • M Lax
  • P K Henneberger
  • E R Heitzman
  • D J Peppi
چکیده

Forty two of 125 former workers in a factory in Syracuse, New York, which manufactured hard metal parts from tungsten carbide and cobalt, were studied by chest radiographs, spirometry, and plethysmographically determined lung volumes. The plant was closed in 1982 and the studies were performed in 1983-5. Recorded measurements of carbide dust concentrations were only mildly excessive by modern standards, but deceitful efforts to reduce the apparent concentration of dust were known to have occurred during an inspection by the Occupational Safety and Health Administration. Lung biopsies in four cases in the study and necropsy in one of the 83 cases not studied during life showed giant cell interstitial pneumonia and appreciable concentrations of tungsten carbide. This information indicates that exposure was substantial. Four workers had evidence of pulmonary fibrosis by chest radiographs; two of these workers had normal pulmonary function. Fourteen had abnormal pulmonary function, five of whom had a restrictive pattern, eight a pattern of air trapping, and one a combined pattern. Thus radiographic, or functional abnormalities, or both occurred in 16 of the 42 cases studied. No correlation with duration of exposure was established. Progressive clinically important disease (one fatal) has been found in four ex-workers, two in each of the restrictive and air trapping groups. These findings suggest that poorly regulated dust concentrations in a hard metals factory possibly cause pulmonary abnormalities and sometimes severe illness.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Development of Cemented Carbide Tool of Reduced Rare Metal Usage

Cemented carbides, including coated cemented carbides, account for 75% of the cutting tools market because of their features such as high hardness, toughness, and the responsiveness to iron, through the use of tungsten carbide for their main hard phases and cobalt for their bonding metals. The consumption of tungsten continues to increase as the amount of carbide tool production increases with ...

متن کامل

Characteristics of dusts encountered during the production of cemented tungsten carbides.

Inhalation of cobalt (Co) and tungsten carbide (WC) particles, but not Co or WC alone, may cause hard metal disease, risk of which does not appear to be uniform across cemented tungsten carbide (CTC) production processes. Inhalation of Co alone or in the presence of WC may cause asthma. Hypothesizing that aerosol size, chemical content, heterogeneity, and constituent compaction may be important...

متن کامل

Computed tomography of the thorax in workers exposed to hard metals.

Hard metal disease is an occupational lung disorder occurring primarily among workers employed in the cemented tungsten carbide industry."4 Interstitial pulmonary fibrosis, acute obstructive pulmonary disease (asthma), and dermatitis are the main clinical manifestations of such exposure. The workers in this industry are at risk from exposure to powders of a variety of hard metals during the man...

متن کامل

Sintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling

The aim of the present work is to study the effects of the nanostructured WC-20 wt. % (Fe,Co) with different ratios of iron to cobalt on the microstructure and hardness of sintered samples. Furthermore, a sample with a cobalt binder under the same condition was produced for the comparison purposes. The nanocomposite development, after different milling times, has been monitored by means of X-ra...

متن کامل

Effect of SiC Nanowhisker on the Microstructure and Mechanical Properties of WC-Ni Cemented Carbide Prepared by Spark Plasma Sintering

Ultrafine tungsten carbide-nickel (WC-Ni) cemented carbides with varied fractions of silicon carbide (SiC) nanowhisker (0-3.75 wt.%) were fabricated by spark plasma sintering at 1350°C under a uniaxial pressure of 50 MPa with the assistance of vanadium carbide (VC) and tantalum carbide (TaC) as WC grain growth inhibitors. The effects of SiC nanowhisker on the microstructure and mechanical prope...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • British journal of industrial medicine

دوره 49 12  شماره 

صفحات  -

تاریخ انتشار 1992