Solid Cooling
نویسنده
چکیده
References 1. Barnes, W. L., Dereux, A. & Ebbesen, T. W. Nature 424, 824–830 (2003). 2. Novoselov, K. S. et al. Science 306, 666–669 (2004). 3. Jablan, M., Buljan, H. & Soljačić, M. Phys. Rev. B 80, 245435 (2009). 4. Yan, H. et al. Nature Photon. 7, 394–399 (2013). 5. Ju, L. et al. Nature Nanotech. 6, 630–634 (2011). 6. Yan, H. et al. Nature Nanotech. 7, 330–334 (2012). 7. Fei, Z. et al. Nano Lett. 11, 4701–4705 (2011). 8. Chen, J. et al. Nature 487, 77–81 (2012). 9. Fei, Z. et al. Nature 487, 82–85 (2012). 10. Li, Z. Q. et al. Nature Phys. 4, 532–535 (2008).
منابع مشابه
Cooling rate optimization of as-cast consciously cast steel
Abstract: A combination of a finite element method (FEM) algorithm with ANSYS codes and post image processing of NDT ultrasonic images along with laboratory cooling experiments and microstructural analysis provide a guideline to determine the optimum cooling rate for any grade of steel in which the highest productivity can be achieved without any degradation of the cast steel products. The sugg...
متن کاملModeling and Analysis of a Solid Oxide Fuel Cell Based Trigeneration System with an Oxygenated Fuel by Using an Exergoeconomic Methodology for Power, Heating and Cooling Production
In the present study, thermo-economic analysis of a combined solid oxide fuel cell (SOFC) with a gas turbine, a generator-absorber heat exchanger (GAX) and heating process heat exchanger for heating, cooling and power production as a tri-generation system is conducted. Also, an external steam reformer is applied to convert methanol as oxygenated fuel to hydrogen for the electrochemical process ...
متن کاملUltrasonic and Cooling Approaches for Reinforcement of the Microextraction Methods
Since solid-phase and liquid-phase microextraction (SPME and LPME) were introduced, as effective solvent-free methods, many efforts have been made to improve their modes and applications. However, due to limitations with sensitivity and efficiency, researchers have focused on improving the performance of their basic primary modes. In this way, in recent years, different methods such as ultrason...
متن کاملEvolution of recorded microstructures in minerals during cooling of Zarrin intrusion, evidence for dynamic deformation
The Zarrin granitoids is located in the west of Yazd block, Central Iran. Zarrin granitoids exhibit mylonitic rocks ranging from protomylonitic to mylontic. In Zarrin granitoids examples of sub-magmatic, microstructures are represented by chessboard patterns in quartz and sub-magmatic fractures in plagioclase, indicating deformation at high-temperature conditions (T > 650º C) and the presence o...
متن کاملEvaluation of Strategies for Temperature and Moisture Control in Solid State Packed Bed Bioreactors
Different control strategies of bed temperature and moisture were investigated using various inlet air temperatures and air fluxes in both the ordinary packed bed bioreactor (without cooling water in the jacket) and the bioreactor with cooling water in jacket. The experiments were carried out within a 1-L solid-state packed bed bioreactor in which Aspergillus niger was cultivated on wheat bran....
متن کاملThermal Simulation of Solidification Process in Continuous Casting
In this study, a mathematical model is introduced to simulate the coupled heat transfer equation and Stefan condition occurring in moving boundary problems such as the solidification process in the continuous casting machines. In the continuous casting process, there exists a two-phase Stefan problem with moving boundary. The control-volume finite difference approach together with the boundary ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013