Universal scaling in transient creep.
نویسندگان
چکیده
We present experimental evidence that pressure solution creep does not establish a steady-state interface microstructure as previously thought. Conversely, pressure solution controlled strain and the characteristic length scale of interface microstructures grow as the cubic root of time. Transient creep with the same scaling is known in metallurgy (Andrade creep). The apparent universal scaling of pressure solution transient creep is explained using an analogy with spinodal dewetting.
منابع مشابه
Transient effects of drying creep in nanoporous solids: understanding the effects of nanoscale energy barriers.
The Pickett effect is the phenomenon of creep enhancement during transient drying. It has been observed for many nanoporous solids, including concrete, wood and Kevlar. While the existing micromechanical models can partially explain this effect, they have yet to consider nanoscale dynamic effects of water in nanopores, which are believed to be of paramount importance. Here, we examine how creep...
متن کاملScaling laws of creep rupture of fiber bundles.
We study the creep rupture of fiber composites in the framework of fiber bundle models. Two fiber bundle models are introduced based on different microscopic mechanisms responsible for the macroscopic creep behavior. Analytical and numerical calculations show that above a critical load the deformation of the creeping system monotonically increases in time resulting in global failure at a finite...
متن کاملRobust On-Chip Communication
The balance between computation and communication is a fundamental issue in application performance. As the chip industry gets entrenched in multicore architectures, this issue will become particularly and progressively important—not only in terms of chip-level performance, but also in terms of power, temperature, and reliability. Reliable communication is essential to overall computational rob...
متن کاملPost-seismic and interseismic fault creep II: transient creep and interseismic stress shadows on megathrusts
S U M M A R Y We use idealized subduction megathrust models to examine aseismic, frictional fault creep throughout the interseismic period. We consider rate-dependent and rateand state-dependent friction. When there is significant post-seismic creep surrounding locations of coseismic slip, the creep rates surrounding an asperity may be lower than the plate convergence rate late in the seismic c...
متن کاملEffect of Reversed Cyclic Stressing and Phase Transition on the Transient and Steady State Creep Behaviour of Al–22 wt% Ag Alloy
Static and completely reversed cyclic creep acceleration characteristics of Al – 22 wt% Ag alloy were investigated using a modified tensile testing machine. Different amplitudes of reversed cyclic stress (σrev) ranging from 7.2 to 10.2 MPa at different working temperatures ranging from 353 K to 413 K were performed. To get a relation between aging temperature and threshold stress (σth) for cycl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review letters
دوره 89 24 شماره
صفحات -
تاریخ انتشار 2002