Crack Identification on a Beam by Vibration Measurement and Wavelet Analysis
نویسندگان
چکیده
CRACK IDENTIFICATION ON A BEAM BY VIBRATION MEASUREMENT AND WAVELET ANALYSIS D.SRINIVASARAO, DR.K.MALLIKARJUNA RAO, DR.G.V.RAJU 1 Asst.Professor, Dept. of Mechanical Engineering, DMSSVH College of Engineering Machillipatnam, Krishna Dt. A.P., India 2 Professor, Dept. of Mechanical Engineering, JNTU, Kakinada, A.P., India 3 Professor, Dept. of Mechanical Engineering, SRKR Engineering College, Bhimavaram, West Godavari Dt. A.P., India Abstract
منابع مشابه
Experimental and finite-element free vibration analysis and artificial neural network based on multi-crack diagnosis of non-uniform cross-section beam
Crack identification is a very important issue in mechanical systems, because it is a damage that if develops may cause catastrophic failure. In the first part of this research, modal analysis of a multi-cracked variable cross-section beam is done using finite element method. Then, the obtained results are validated usingthe results of experimental modal analysis tests. In the next part, a nove...
متن کاملCrack Detection of Timoshenko Beams Using Vibration Behavior and Neural Network
Abstract: In this research, at first, the natural frequencies of a cracked beam are obtained analytically, then, location and depth of a crack in beam is identified by neural network method. The research is applied on a beam with an open crack for three different boundary conditions. For this purpose, at first, the natural frequencies of the cracked beam are obtained analytically, to get the ex...
متن کاملModal Testing and Finite Element Analysis of Crack Effects on Turbine Blades
The study of vibration response of a turbine blade helps to detect the crack presence in the blade which alters its dynamic characteristics. The change is characterized by changes in the modal parameters associated with natural frequencies. In this paper, study of vibration response is made for turbine blade in the presence of a crack like defect. Turbine blade is initially assumed as a cantile...
متن کاملAnalytic Approach to Free Vibration and Buckling Analysis of Functionally Graded Beams with Edge Cracks using four Engineering Beam Theories
A complete investigation on the free vibration and stability analysis of beams made of functionally graded materials (FGMs) containing open edge cracks utilizing four beam theories, Euler-Bernoulli, Rayleigh, shear and Timoshenko, is performed in this research. It is assumed that the material properties vary along the beam thickness exponentially and the cracked beam is modeled as two segments ...
متن کاملSystem identification of a beam with frictional contact
The nonlinear system becomes an area with numerous investigations over the past decades. The conventional modal analysis could not be applied on nonlinear continuous system which makes it impossible to construct the reduced order models and obtain system response based on limited number of measurement points. Nonlinear normal modes provide a useful tool for extending modal analysis to nonlinea...
متن کامل