Investigation of basic properties of fly ash from urban waste incinerators in China.

نویسندگان

  • Jian-guo Jiang
  • Xin Xu
  • Jun Wang
  • Shi-jian Yang
  • Yan Zhang
چکیده

Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD). The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements (>10000 mg/kg, listed in decreasing order of abundance) in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements (1000 to 10000 mg/kg) include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L (Pb) and from 0.049 to 164.90 mg/L (Zn), mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali content of CaO greatly contribute to leaching toxicity of heavy metal and acid neutralization capacity against acid rain.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigation of arsenic removal parameters by a new nano-hybrid adsorbent produced from red mud and fly ash

Two common waste materials, red mud and fly ash, were used to produce a new nano-hybrid adsorbent by heat treatment with alkali addition. The new zeolitic structure formation of the hybrid adsorbent was revealed using the BET surface area, XRD, and SEM analyses. This hybrid adsorbent was utilized to remove arsenic from synthetic and real waste waters by batch and column adsorption experiments. ...

متن کامل

Dioxin concentrations in the blood of workers at municipal waste incinerators.

OBJECTIVES Increased concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzo-furans (PCDFs) in pooled blood samples from workers at municipal waste incinerators have been reported. This study was undertaken to confirm these results in individual blood samples from potentially exposed and unexposed workers at municipal waste incinerators compared with matched unex...

متن کامل

Production of glass-ceramic from incinerator fly ash

Vitrification is one of the technological options for treating toxic waste. This paper reports the results of the feasibility study of utilizing fly ash from municipal waste incinerators by powder sintering technology. This process was used to transform vitrified incinerated fly ash into a CaO–Al2O3–SiO2 system of glass ceramic products. The major phase exhibited is gehlenite (Ca2Al2SiO7), whic...

متن کامل

A Study on removal of chromium from tannery effluent treatment of chrome tanning waste water using tannery solid waste

This study illustrates the process of removal of chromium from chrome tanning waste-water by fly ash which was drive from chrome shaving dust. This experiment was carried out in a batch process with laboratory prepared adsorbent samples and chrome tanning water collected from local tanneries. The influence of various factors likes adsorbent doses, contact time, and initial concentration of chro...

متن کامل

The potential of recycling and reusing municipal solid waste incinerator ash in Taiwan.

By 2004, there were 19 municipal solid waste incinerators (MSWI) with a total yearly treatment capacity of 7.72 million tons in service in Taiwan. All 19 incinerators operated daily to generate about 1.05 million tons of incinerator ash, including bottom ash and stabilized fly ash in 2003, and the average ash yield is 18.67%. The total number of incinerators is expected to increase to 27, servi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of environmental sciences

دوره 19 4  شماره 

صفحات  -

تاریخ انتشار 2007