Ultra-Violet pretreatment of Titanium dioxide and Tin-doped Indium oxide surfaces as a promoter for adsorption of organic molecules in dry deposition processes: Light patterning of organic nanowires
نویسندگان
چکیده
1 Nanotechnology on Surfaces Lab. Materials Science Institute of Seville (ICMS, CSIC-US), Avd. Americo Vespucio 49, 41092, Seville (Spain). 2 Nanotech@surfaces Lab. EMPA, Swiss Federal Laboratories for Materials Science and Technology, Überlandstrasse 129 CH-8600 Dübendorf (Switzerland). 3 Department of Physical, Chemical and Natural Systems, University Pablo de Olavide, Carretera de Utrera, km.1, Seville (Spain), 4 Centro Nacional de Aceleradores (US-CSIC,) Av. Thomas A. Edison, 7, 41092, Seville (Spain), 5 Instituto de Ciencia de Materiales de Barcelona (ICMAB, CSIC), Campus de la Universitat Autonoma de Barcelona, 08193 Bellaterra (Spain)
منابع مشابه
Doping-dependent electrical characteristics of SnO2 nanowires.
Tin dioxide (SnO2) represents an importantmetal-oxide group that can be suitable for a range of applications through the incorporation of dopants. For example, the electrical conductivity of intrinsic SnO2 depends strongly on the surface properties, as molecular adsorption/desorption will affect the band modulation and space-charge layer, which makes SnO2 an important conductance-type gas-sensi...
متن کاملElectrochemical deposition of patterning and highly luminescent organic films
This paper describes a simple electrochemical deposition (ED) technique to prepare luminescent and patterned films for light-emitting devices (LEDs). The luminescent films are deposited directly on the patterned ITO (indium tin oxide) electrodes through an oxidation coupling reaction of an electroactive and luminescent precursor. The ED films deposited on the ITO strips (width of 200 μm) exhibi...
متن کاملTurn-on voltage reduction of organic light-emitting diode using a nickel-doped indium tin oxide anode prepared by single target sputtering
Organic light-emitting diodes (OLEDs) with a nickel (Ni)-doped indium tin oxide (ITO) anode were fabricated. The Ni-doped ITO anode was prepared using sputter deposition of Ni–ITO single targets consisting of 1, 3 and 5 wt% of nickel. Turn-on voltage of OLED devices with the Ni-doped ITO anode was reduced by 2.5, 4 and 3.8 V for 1, 3 and 5 wt% targets, respectively. Half-luminance lifetime was ...
متن کاملEnhanced light-conversion efficiency of titanium- dioxide dye-sensitized solar cells with the addition of indium-tin-oxide and fluorine-tin-oxide nanoparticles in electrode films
We prepared of electrodes that consist of TiO2 with addition of tin-doped indium oxide (ITO) or fluorine-doped tin oxide (FTO) nanoparticles and the application of such electrodes on dye-sensitized solar cell. As compared to TiO2 alone, the addition of ITO and FTO nanoparticles resulted in an efficiency improvement of ~ 20% up to ~ 54% for the TiO2ITO and TiO2-FTO systems, respectively. This im...
متن کاملCarbon nanotubes grown on In2O3:Sn glass as large area electrodes for organic photovoltaics
The authors report the growth of multiwall carbon nanotubes directly onto indium tin oxide glass via chemical vapor deposition as large area semitransparent electrodes for organic solar cell applications. The rate of nanotube growth on this ternary oxide is greatly reduced as compared to that of silicon dioxide and glass substrates enabling a high degree of control over nanotube height. The str...
متن کامل