Infrared thermography of electroconductive woven textiles

نویسنده

  • G. De Mey
چکیده

Modelling of the current density in elelectroconductive textiles is a complicated problem as they cannot be considered homogenous structures with an isotropic current distribution. This anisotropy is mainly the result of the electrical contact resistance between interlacing yarns comprising the textile. It is difficult to measure the contact resistance directly as it is often nonlinear and depends on many factors, however it can by inferred by comparing computer simulations of the power distribution in the textiles with their corresponding IR images.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Active Infrared Thermography Technique for the Non Destructive Testing of Composite Material

Delamination is one of the most common defects in laminate composite materials. To detect delaminations, different non-destructive test methods such as infrared thermography methods are currently widespread for non-destructive inspection, recommended for evaluating composite materials mostly in the active variant. The principle behind infrared thermography consists in highlighting the relevant ...

متن کامل

Experimental Detection of Composite Delamination Damage based on Ultrasonic Infrared Thermography

An experimental setup is designed to detect composite delamination damage based on ultrasonic infrared thermography. The ultrasonic infrared thermography system is composed by ultrasonic excitation system, infrared thermal imager and data acquisition system and two damaged composite plate specimens are produced in the experiment. The image processing methods including thresholding, filters, edg...

متن کامل

Textile integrated sensors and actuators for near-infrared spectroscopy.

Being the closest layer to our body, textiles provide an ideal platform for integrating sensors and actuators to monitor physiological signals. We used a woven textile to integrate photodiodes and light emitting diodes. LEDs and photodiodes enable near-infrared spectroscopy (NIRS) systems to monitor arterial oxygen saturation and oxygenated and deoxygenated hemoglobin in human tissue. Photodiod...

متن کامل

Noninvasive, Wireless Textronic System to Breath Frequency Measurement

In this paper authors presented the research of textile electroconductive materials, which can be used to construction sensory textronic shirt to breath frequency measurement. The full paper also will present results of measurements carried out on unique measurement stands. Keywords—Electroconductive fibres, textile sensor, textronic, respiratory rhythm measurement.

متن کامل

Quantitative characterization of vapour adsorption on solid surfaces and estimation of emissivity of solids using infrared thermography

The process of adsorption of water-vapour molecules on uneven (irregular) surfaces of some solid materials at room temperature is registered by infrared camera. The pronounced "thermal flame" ("thermal fire") phenomenon developing on the samples’ surfaces is exhibited and quantitatively represented. This thermal effect ranged within an order of magnitude. 3-μm-wavelength emissivities of differe...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008