Analyze a various specifications of Microstrip Patch Array Antenna Using Beamforming Method for ISM Band Applications
نویسنده
چکیده
In this paper, the design of 4x4 smart antenna array antenna along with the butler matrix network which can be used for beamforming (pointing an antenna array). Unlike the conventional schemes where an array of microstrip patch antennas are used, the radiation becomes omnidirectional and therefore the power losses are more. In the proposed design, the designed antenna is operating at the frequency of ISM Band 2.4 to 2.48 GHz. The smart antenna array consists of microstrip patch antenna with the inclusion of Butler matrix and the performance of the antenna is improved from the obtained simulation results in Advanced design System (ADS).
منابع مشابه
A compact stacked Quasi-fractal microstrip antenna for RFID applications
In this paper, we propose a new compact quasi-fractal shaped microstrip antenna that consists of a hexagonal patch as the main radiator and a complementary stacked patch as the parasitic element. The overall surface of the proposed quasi-fractal patch is about 55% lower than the conventional hexagonal patch. Using of stacked technique, the gain reduction of compression technique is almost compe...
متن کاملModified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications
A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...
متن کاملDESIGN OF MICROSTRIP PATCH ANTENNA FOR 2.45GHz WIRELESS APPLICATIONS
Microstrip patch antennas are widely used in modern day communication devices due to their light weight, low cost and ease of fabrication. In this paper, we have designed a Microstrip Patch Antenna and array of patch for 2.45GHz for Wireless Local Area Network (WLAN) applications using antenna simulation software. The designed antenna consists of rectangular radiating patch on FR-4 (lossy) subs...
متن کاملBroadband Stacked Microstrip Patch Antenna for L-Band Operation: FDTD Modeling
This paper presents a novel implementation of an electromagnetically coupled patch antenna using air gap filled substrates to achieve the maximum bandwidth. We also propose an efficient modeling technique using the FDTD method which can substantially reduce the simulation cost for modeling the structure. The simulated results have been compared with measurement to show the broadband behavio...
متن کاملDesign Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays
In this paper two linear arrays including a linear 1×4 and a planar 2×2 of microstrip patch and half-mode substrate integrated waveguide (SIW) cavity hybrid antenna are introduced and investigated. These are simply implemented using low cost single layer printed circuit board (PCB) process. The array element consists of a rectangular microstrip patch with appropriate dimensions in the vicinity ...
متن کامل