On Simulation of Edge Stretchability of an 800MPa Advanced High Strength Steel
نویسندگان
چکیده
In the present work, the edge stretchability of advanced high strength steel (AHSS) was investigated experimentally and numerically using both a hole expansion test and a tensile specimen with a central hole. The experimental fracture strains obtained using the hole expansion and hole tension test in both reamed and sheared edge conditions were in very good agreement, suggesting the tests are equivalent for fracture characterization. Isotropic finite-element simulations of both tests were performed to compare the stress-state near the hole edge.
منابع مشابه
Experimental Investigations on Stretchability of an Austentic Stainless Steel 316L
The purpose of this investigation is to examine the viability of using the sheet metal for forming applications. Forming limit diagram (FLD) composed of negative and positive minor strain with respect to major strain which occurs at directional zero strain with the critical thickness of sheet metal. The negative minor strain region of FLD is predicted by localized necking. However there is no d...
متن کاملPredicting tensile stretchability of trimmed AA6111-T4 sheets
An integrated manufacturing process simulation framework has been developed to predict the trimmed edge tensile stretchability of AA6111-T4 sheets by incorporating the burr geometry, damage, and plastic strain from trimming simulations into subsequent tensile stretchability simulations. The influence of the trimming die clearances on the predicted tensile stretching ductility (stretchability) i...
متن کاملExperimental and Numerical Study of Preform Design in Multi Stage Deep Drawing of High Strength Thin Steel Sheet
In this paper, experimental results of a deep drawing process to produce a cylinder of high strength steel with a spherical head were compared with it’s simulation results and three proposal design types. Meanwhile, the amount of limiting draw ratio in some stages was determined. Accuracy and precision of the results of a finite element software to predicting the multi stage deep drawing proces...
متن کاملInvestigation of structural changes in resistance spot welding of advanced high strength steel DP590
The structural and hardness developed in advanced high-strength steel DP590 have been investigated with the help of optical microscopy and scanning electron microscopy on resistance spot welded specimens. The hardness diagram of the weld sections was prepared by microhardness test and the temperature peak and heat distribution were simulated by menas of the Abaqus software. The results show tha...
متن کاملAnalytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Products Joints
Electromagnetic forming is a high energy rate forming process. In this process, an electromagnetic Lorentz body force is used for deformation of products. In this article, Electromagnetic forming process was simulated for assembly of parts as an innovative method. In this research work, the effect of important parameters of process such as discharge energy, radius and width of rectangular groov...
متن کامل