Polymerization Behavior of Resins for Precious Metals
نویسنده
چکیده
Adhesion promoting monomers — 5(4-vinylbenzyl) -2-thiobarbituric acid (5VS) , 9,10-epithiodecyl methacrylate (EP8MA) , 9,10-epithiodecyl 4-vinylbenzoate (EP8VB) , and 3,4-epithiobutyl 2,2-bis (methacryloyloxymethyl) propionate (EP2BMA) — were added to the MMA liquid of a MMA-PMMA/TBBO resin. Three dental precious metal alloys were butt-jointed together with the MMA-PMMA/TBBO adhesive resin, and tensile bond strength was measured after 2,000 thermocycles in water. Polymerization kinetics of MMA by 2,2'-azobis (isobutyronitrile) at 70 °C in the presence of 5VS, EP8MA, EP8VB, or EP2BMA were examined quantitatively using a DSC to clarify the relationship between the adhesive properties of MMAPMMA/TBBO adhesive resin and the kinetic polymerization behavior thereof. Obtained kinetic parameters indicated that 5VS was not suitable as an adhesive monomer for adhesive resin formulations and that EP2BMA possessed the latent potential as an adhesive monomer. Further, tensile test results revealed the applicability of EP8MA, EP8VB, and EP2BMA as an adhesive monomer component of adhesive resin formulations.
منابع مشابه
Adhesive properties and kinetic polymerization behavior of resins containing adhesion promoting monomers for precious metals.
Adhesion promoting monomers -5-(4-vinylbenzyl)-2-thiobarbituric acid (5VS), 9,10-epithiodecyl methacrylate (EP8MA), 9,10-epithiodecyl 4-vinylbenzoate (EP8VB), and 3,4-epithiobutyl 2,2-bis(methacryloyloxymethyl)propionate (EP2BMA)--were added to the MMA liquid of a MMA-PMMA/TBBO resin. Three dental precious metal alloys were butt-jointed together with the MMA-PMMA/TBBO adhesive resin, and tensil...
متن کاملSurface treatment agent for dental metals using a thiirane monomer and a phosphoric acid monomer.
To develop a new surface treatment agent which improves the bond strength of adhesive resin to both non-precious and precious metals, experimental treatment agents containing both an adhesive bonding promoter for precious metals and one for non-precious metals were prepared by dissolving epithioalkyl methacrylate (EP3MA or EP8MA) and 10-methacryloyloxydecyl dihydrogen phosphate (MDP) in acetone...
متن کاملDissymmetric dinuclear transition metal complexes as dual site catalysts for the polymerization of ethylene
A series of dissymmetric dinuclear complexes were synthesized, as dual site catalysts in ethylene polymerization, by coupling the allylated a-diimine complexes of the metals Ti, Zr, V, Ni and Pd with the ansa-zirconocene complex [C5H4-SiH(Me)-C5H4]ZrCl2 possessing a hydride silane moiety. The different stages of syntheses included the formation of bis(cyclopentadienide)methyl silane which was u...
متن کاملIon Exchange for Recovery of Precious Metals
ith the rapid rise that has occurred in the prices of precious metals during the past few years, recovery of even minute amounts of theseelements has become of greater interest to metal finishers. Although precious metals are recovered easily from concentrated solutions by reduction and precipitation or electrolysis, solutions containing a few parts per million aredifficult to handle by these m...
متن کاملRetrieval of Precious Metal from Waste Effluent at Precious Plate Inc. in Niagara Falls , NY
Precious Plate, Inc. is a local electroplating company that uses a variety of metals during its processes. Post-deposition, the aqueous phase used is designated for disposal, which poses problems regarding the metal content of the waste stream. First, EPA regulations mandate that metals be kept below specific levels. Even at levels capable of meeting EPA limits, the loss of metals within their ...
متن کامل