High-performance, low-voltage electroosmotic pumps with molecularly thin silicon nanomembranes.
نویسندگان
چکیده
We have developed electroosmotic pumps (EOPs) fabricated from 15-nm-thick porous nanocrystalline silicon (pnc-Si) membranes. Ultrathin pnc-Si membranes enable high electroosmotic flow per unit voltage. We demonstrate that electroosmosis theory compares well with the observed pnc-Si flow rates. We attribute the high flow rates to high electrical fields present across the 15-nm span of the membrane. Surface modifications, such as plasma oxidation or silanization, can influence the electroosmotic flow rates through pnc-Si membranes by alteration of the zeta potential of the material. A prototype EOP that uses pnc-Si membranes and Ag/AgCl electrodes was shown to pump microliter per minute-range flow through a 0.5-mm-diameter capillary tubing with as low as 250 mV of applied voltage. This silicon-based platform enables straightforward integration of low-voltage, on-chip EOPs into portable microfluidic devices with low back pressures.
منابع مشابه
Low-voltage electroosmotic pumps fabricated from track-etched polymer membranes.
Track-etched polymer membranes are used to realize low-voltage electroosmotic (EO) pumps. The nanopores in polycarbonate (PC) and polyethylene terephthalate (PET) membranes were fabricated by the track-etching technique, the pore diameter was controlled in the range of 100 to 250 nm by adjusting the etching time. The results show that these EO pumps can provide high flow rates at low applied vo...
متن کاملJunctionless ferroelectric field effect transistors based on ultrathin silicon nanomembranes
The paper reported the fabrication and operation of nonvolatile ferroelectric field effect transistors (FeFETs) with a top gate and top contact structure. Ultrathin Si nanomembranes without source and drain doping were used as the semiconducting layers whose electrical performance was modulated by the polarization of the ferroelectric poly(vinylidene fluoride trifluoroethylene) [P(VDF-TrFE)] th...
متن کاملElectroosmotic flow pumps with polymer frits
Electroosmotic flow (EOF) pumps with flow rates on the order of 1 ml/min have been designed and fabricated. These pumps use EOF to propel liquid solutions in a compact system with no moving parts. The pumping chamber is filled with densely packed non-porous silica particles, and the particle bed is held in place using two polymeric porous frits. The pump frame is made of acrylic, the frits are ...
متن کاملHigh-pressure electroosmotic pumps based on porous polymer monoliths
Electroosmotic pumps have been prepared using macroporous polymer monoliths with their pore surface grafted with the ionizable monomers 2-acrylamido-2-methyl-1-propanesulfonic acid and [2-(methacryloyloxy)ethyl]trimethyl ammonium chloride, respectively. The effects of critical parameters such as pore size of the monolith, percentage of ionizable moieties in the grafted layer, crosslinking densi...
متن کاملElectroosmotic Pumps with Frits Synthesized from Potassium Silicate.
Electroosmotic pumps employing silica frits synthesized from potassium silicate as a stationary phase show strong electroosmotic flow velocity and resistance to pressure-driven flow. We characterize these pumps and measure an electroosmotic mobility of 2.5 × 10(-8) m(2)/V s and hydrodynamic resistance per unit length of 70 × 10(17) Pa s/m(4) with a standard deviation of less than 2% even when v...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Proceedings of the National Academy of Sciences of the United States of America
دوره 110 46 شماره
صفحات -
تاریخ انتشار 2013