Drawing Pressure Estimation Using Torque Feedback Control Model of A 4-DOF Robotic Arm
نویسندگان
چکیده
This paper we introduce a torque feedback control (TFC) model to estimate pressure of the hand on a 4-DOF robotic arm of Betty, a humanoid robot. Based on several preliminary experiments of different stroke patterns, we measured and analysed the torque replies of Betty’s servos in order to model the torque feedback. We developed a robust humanoid system to create sketch like drawing with limited hardware which has no force sensor but basic torque feedback from servos to estimate pressure apply on drawing pad. We investigated the efficiency of using the TFC in the drawing task based on several different stroke patterns. The experimental results indicate that the TFC model successfully corrected the errors during the drawing task.
منابع مشابه
Control of a 2-DoF robotic arm using a P300-based brain-computer interface
In this study, a novel control algorithm, based on a P300-based brain-computer interface (BCI) is fully developed to control a 2-DoF robotic arm. Eight subjects including 5 men and 3 women perform a 2-dimensional target tracking in a simulated environment. Their EEG (Electroencephalography) signals from visual cortex are recorded and P300 components are extracted and evaluated to perform a real...
متن کاملDynamic modeling and control of a 4 DOF robotic finger using adaptive-robust and adaptive-neural controllers
In this research, first, kinematic and dynamic equations of a 4-DOF 3-link robotic finger are derived using Denavit-Hartenberg convention and Lagrange’s formulation. To model the muscles, several springs and dampers are placed between the finger links. Then, two advanced controllers, namely adaptive-robust and adaptive-neural, which can control the robotic finger in presence of parametric uncer...
متن کاملAn LPV Approach to Sensor Fault Diagnosis of Robotic Arm
One of the major challenges in robotic arms is to diagnosis sensor fault. To address this challenge, this paper presents an LPV approach. Initially, the dynamics of a two-link manipulator is modelled with a polytopic linear parameter varying structure and then by using a descriptor system approach and a robust design of a suitable unknown input observer by means of pole placement method along w...
متن کاملAn Adaptive-Robust Control Approach for Trajectory Tracking of two 5 DOF Cooperating Robot Manipulators Moving a Rigid Payload
In this paper, a dual system consisting of two 5 DOF (RRRRR) robot manipulators is considered as a cooperative robotic system used to manipulate a rigid payload on a desired trajectory between two desired initial and end positions/orientations. The forward and inverse kinematic problems are first solved for the dual arm system. Then, dynamics of the system and the relations between forces/momen...
متن کاملDesign, Control and Evaluation of a Whole-Sensitive Robot Arm for Physical Human-Robot Interaction
The paper focuses on design and control of a new anthropomorphic robot arm enabling the torque measurement in each joint to ensure safety while performing tasks of physical interaction with human and environment. When the contact of the robot arm with an object occurs, local admittance algorithm provides active compliance of corresponding robot arm joint. Thus, the whole structure of the manipu...
متن کامل