Reduced-order ℋ2/ℋ∞ control of discrete-time LPV systems with experimental validation on an overhead crane test setup
نویسندگان
چکیده
This paper presents a numerically attractive approach to design reduced-order multi-objective H2/H∞ controllers for discrete-time linear parameter-varying (LPV) systems. The proposed controller synthesis approach relies on an a priori computed polynomially parameter-dependent fullorder LPV controller that stabilizes the LPV system for all possible parameter trajectories. This full-order controller is subsequently used in a sufficient linear matrix inequality (LMI) optimization problem for reduced-order H2/H∞ LPV synthesis. Pólya relaxations are used to obtain tractable LMI formulations, and a simplicial subdivision of the parameter domain is applied to relieve the numerical burden. Experimental validations on a lab-scale overhead crane with varying cable length illustrate the practical viability of the approach.
منابع مشابه
Application of Independent Joint Control Strategy for Discrete-Time Servo Control of Overhead Cranes
In this study, a new servo control system is presented for the overhead crane based on discrete-time state feedback approach. It provides both robust tracking and load swing suppression. Inspired from independent joint and computed torque control in robot manipulator field, a new model is derived in which the crane actuators are considered as the main plant. The crane nonlinearities are then tr...
متن کاملExperimental Validation of Robust Iterative Learning Control on an Overhead Crane Test Setup
This paper presents an experimental validation of a recently proposed robust normoptimal iterative learning control (ILC). The robust ILC input is computed by minimizing the worst-case value of a performance index under model uncertainty, yielding a convex optimization problem. The proposed robust ILC design is experimentally validated on a lab scale overhead crane system, showing the advantage...
متن کاملAmodel predictive control approach for time optimal point-to-point motion control
This paper presents a new model predictive control method for time-optimal point-to-point motion control of mechatronic systems. The formulation of time-optimal behavior within the model predictive control framework and the structure of the underlying optimization problem are discussed and modifications are presented in order to decrease the computational load of the numerical solution method s...
متن کاملPredictive Controlled GSP Performance Improvement with an Integrated ℋ2/ℋ∞ (TECHNICAL NOTE)
To improve the performance of a robust control, in presence of internal or external disturbance and uncertainties, to make a smooth tracking and elimination of high frequency disturbances especially in accurate systems with minimum power consumption an integration of robust optimal controller considered. Here, derivation and implementation of the proposed controller based on the combination of ...
متن کاملMicrosoft Word - Arash PhD Thesis_Report Format.docx
This thesis focuses on developing advanced control methods for two industrial systems in discrete-time aiming to enhance their performance in delivering the control objectives as well as considering the practical aspects. The first part addresses wind power dispatch into the electricity network using a battery energy storage system (BESS). To manage the amount of energy sold to the electricity ...
متن کامل