A Single-Chip 2.4GHz Low-Power CMOS Receiver and Transmitter for WPAN Applications
نویسندگان
چکیده
A single chip 2.4GHz low power CMOS receiver and transmitter for WPAN applications are implemented and measured. The receiver uses a low-IF architecture with a polyphase filter and transistor linearization technique to improve linearity per power, and the transmitter adopts a ROM based direct-conversion architecture for low power consumption and high integrated density. Experimental results show –79dBm of sensitivity, 13dB of receiver NF, -4.5dBm of receiver IIP3, and 4dBm of transmitter output power. The power consumption is 9mW in receiver and 17mW in transmitter at 1.8V, respectively.
منابع مشابه
LITERATURE SURVEY 1. A Single-Chip 2.4GHz Low-Power CMOS Receiver and Transmitter for WPAN
Applications In this paper A single chip 2.4GHz low power CMOS receiver and transmitter for WPAN applications are implemented and measured. The receiver uses a low-IF architecture with a polyphone filter and transistor linearization technique to improve linearity per power, and the transmitter adopts a ROM based direct-conversion architecture for low power consumption and high integrated densit...
متن کاملA Low Power Fully CMOS Integrated RF Transceiver for Wireless Sensor Networks in Sub-GHz ISM-band
A fully CMOS integrated radio frequency (RF) transceiver for wireless sensor networks in sub-GHz ISMband applications is implemented and measured. The IC is fabricated in 0.18-μm CMOS technology and packaged in LPCC package. The fully monolithic transceiver consists of a receiver, a transmitter and a RF synthesizer with on-chip VCO. The chip fully complies with the IEEE 802.15.4 WPAN standard i...
متن کاملISSCC 2008 / SESSION 20 / WLAN / WPAN / 20 . 6 20 . 6 A 0 . 6 V 32 . 5 mW Highly Integrated Receiver for 2 . 4 GHz ISM - Band Applications
We explore the challenges of designing RF transceivers for an ultra-low-voltage (ULV) supply with performance that is compatible to commercial standards. The ITRS roadmap projects that the aggressive device size scaling will result in supply voltage reductions to well below 1V, in particular for low-power technologies. The use of alternative energy sources also requires ULV operation in some ap...
متن کاملA Single-Chip, 5.15GHz-5.35GHz, 2.4GHz- 2.5GHz, 0.18μm CMOS RF Transceiver for 802.11a/b/g Wireless LAN
A dual band, 5.15GHz-5.35GHz, 2.4GHz-2.5GHz, zeroIF transceiver is fabricated on a 0.18μm CMOS process. The fully integrated synthesizer and VCO achieve an integrated phase error of 0.8 at 5GHz. The transmitter achieves –33dB EVM, while the receiver features a 5.2dB noise figure (NF) at 5.25GHz and 3.5dB NF at 2.45GHz. An architecture including feedback paths enables digital calibration, which ...
متن کامل26.6 a 2.4ghz 34mw Cmos Transceiver for Frequency- Hopping and Direct-sequence Applications
The proliferation of 2.4GHz wireless tandards uch as Bluetooth and IEEES02.llb makes it desirable to realize lowpower, compact transceivers capable of interoperability between frequency-hopping and direct-sequence systems. While Bluetooth requirements for receiver sensitivity and phase noise and transmitter linearity are relatively relaxed, those of IEEE802.11b are much more stringent...
متن کامل