Resistive switching characteristics of MnOx-based ReRAM
نویسندگان
چکیده
The resistive switching characteristics of MnOx thin film were investigated for resistive random access memory (ReRAM) applications. The devices in the form of metal–insulator–metal structure exhibited reversible resistive switching behaviour under both sweeping voltages and voltage pulses. Formation and rupture of conductive filaments were proposed to explain the resistive switching. When Al was used as the top electrode instead of Pt, the device had a better endurance performance. Additionally, the Pt/MnOx /Al device showed fast switching speed and long retention ability. The experiment result suggested that Pt/MnOx /Al device had a potentiality for practical memory application. (Some figures in this article are in colour only in the electronic version)
منابع مشابه
Improved Uniformity of Resistive Switching Characteristics in Ag/HfO2/Pt ReRAM Device by Microwave Irradiation Treatment
The bipolar resistive switching characteristics of resistive random access memory (ReRAM) based on HfO2 thin films have been demonstrated by using Ag/HfO2/Pt structured ReRAM device. MIcrowave irradiation (MWI) treatment at low temperature was employed in device fabrication with HfO2 thin films as a transition layer. Compared to the as-deposited Ag/HfO2/Pt device, highly improved uniformity cha...
متن کاملAnalog and Digital Switching Characteristics of Transition Metal Oxide Based Resistive Random Access Memory (ReRAM) Devices
Transition Metal Oxide (TMO) Based Resistive Random Access Memory (ReRAM) devices have gathered significant research attention for non-volatile data storage applications. The major advantages lie in terms of scalability, low switching voltages, and process compatibility with the CMOS technologies [1, 2]. However, to take the complete benefit of this enabling technology there are several challen...
متن کاملVariation of switching mechanism in TiO2 thin film resistive random access memory with Ag and graphene electrodes
0167-9317/$ see front matter 2012 Elsevier B.V. A http://dx.doi.org/10.1016/j.mee.2012.11.009 ⇑ Corresponding authors. Tel.: +1 412 648 8989. E-mail addresses: [email protected] (M. Yun), We report the fabrication of resistive random access memory (ReRAM) on both Si and PET flexible substrates using TiO2 as the dielectric spacer between Ag electrodes. Ag/TiO2/Ag ReRAM shows unipolar switching...
متن کاملFormation polarity dependent improved resistive switching memory characteristics using nanoscale (1.3 nm) core-shell IrOx nano-dots
Improved resistive switching memory characteristics by controlling the formation polarity in an IrOx/Al2O3/IrOx-ND/Al2O3/WOx/W structure have been investigated. High density of 1 × 1013/cm2 and small size of 1.3 nm in diameter of the IrOx nano-dots (NDs) have been observed by high-resolution transmission electron microscopy. The IrOx-NDs, Al2O3, and WOx layers are confirmed by X-ray photo-elect...
متن کاملAdvanced Cu chemical displacement technique for SiO2-based electrochemical metallization ReRAM application
This study investigates an advanced copper (Cu) chemical displacement technique (CDT) with varying the chemical displacement time for fabricating Cu/SiO2-stacked resistive random-access memory (ReRAM). Compared with other Cu deposition methods, this CDT easily controls the interface of the Cu-insulator, the switching layer thickness, and the immunity of the Cu etching process, assisting the 1-t...
متن کامل