Thermal conductivity and specific heat measurements of metal hydrides

نویسندگان

  • Shane D. Beattie
  • Adam Harris
  • Andre Levchenko
  • Joshua Rudolph
  • Christopher D. Willson
  • Sean McGrady
چکیده

There are extensive efforts underway worldwide to develop inexpensive and practical hydrogen storage materials for the implementation of a hydrogen-based energy economy. Metal hydrides are leading candidates for hydrogen storage applications because they are solid at room temperature and release hydrogen on demand when heated. HSM systems Inc. has developed a practical hydrogen storage system in which the metal hydride is housed in a sealed stainless-steel vessel. Hydrogen is generated by simply heating the enclosed metal hydride. It is important to understand the thermal response of the metal hydride as it is heated to determine when and at what rate the hydrogen will be released. Heat transfer can be modeled with the appropriate knowledge of the vessel’s geometry, composition and intrinsic thermal characteristics (i.e. thermal conductivity and specific heat). Although the thermal properties of stainless steel are well known, those of metal hydrides are poorly characterized. This paper presents a simple and efficient measurement technique for determining the thermal conductivity and the specific heat of metal hydrides. Since practical hydrogen storage applications will likely involve the use of compacted powders, the thermal conductivity of both powdered and pressed pellets of select metal hydrides have been determined; namely: NaAlH4 powder/compressed pellet NaAlH4 + 2% TiCl3 powder/compressed pellet LiAlH4 powder/compressed pellet LiNH2+2LiH powder/compressed pellet 7:1 MgH2:LiBH4 + 1 % TiCl3 powder/compressed pellet The thermal conductivity of each sample has been measured via the modified transient plane source technique. Specific heat measurements have been made using differential scanning calorimetry (DSC). a University of New Brunswick, Fredericton, New Brunswick, Canada, E3B 5A3, 506-4535131 b C-Therm Technologies, Fredericton, New Brunswick, Canada c Setaram Inc., 8430 Central Ave. Suite 3D Newark, CA 94560 – USA d HSM Systems Inc., Fredericton, New Brunswick, Canada

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An Experimental Study on Thermophysical Properties of Multiwalled Carbon Nanotubes (RESEARCH NOTE)

Nanofluids are the heat transfer fluids having remarkable thermal properties. The paper presents the experimental analysis of thermal conductivity, density, specific heat and viscosity of multiwalled carbon nanoparticles dispersed in water at various temperatures and particle concentrations. To examine the forced convection heat transfer of Multiwalled Carbon Nanotubes (MWCNT)-water nanofluid, ...

متن کامل

A Review of Heat Transfer Issues in Hydrogen Storage Technologies

Significant heat transfer issues associated with four alternative hydrogen storage methods are identified and discussed, with particular emphasis on technologies for vehicle applications. For compressed hydrogen storage, efficient heat transfer during compression and intercooling decreases compression work. In addition, enhanced heat transfer inside the tank during the fueling process can minim...

متن کامل

Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells

Recently, the use of renewable energies has increased to  environmental pollution, limitation of fossil energy resources and energy security  One of the means that enable us to use such energies is fuel cells (FC). However, there are many problems  in the commercialization of FC from an economically and operation perspective. One of the most important problems is heat management. New heat pipes...

متن کامل

Investigation of metal hydrides applicability as neutron moderator and shielding by MCNPX

In this research, the applicability of several metal hydrides as neutron moderator and shielding for D-D fusion sources has been investigated by MCNPX code. The results have been investigated in three steps to find the materials with lower thermal, fast and total neutron fluxes than conventional shielding materials. The results show relative advantages of LaNi5H6, VH, TiH2, TaH, Mg (BH4)2, YH2,...

متن کامل

Measurement of Thin Film Isotropic and Anisotropic Thermal Conductivity Using 3ω and Thermoreflectance Imaging

The 3ω method is a well established technique for experimentally extracting thermal conductivity of thin films and substrates. The 3ω method calculates thermal conductivity by measuring thin film temperature response to a metal strip heater deposited on the material’s surface. The electrical resistance of the metal strip is used as both heat source and temperature sensor. An important factor in...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009