The effects of the coupling of titanium implants and dissimilar metal abutments on osteoblast differentiation in vitro.
نویسندگان
چکیده
This study evaluated the effect of titanium endosseous dental implants coupled to dissimilar materials on the capacity of preosteoblasts in bone marrow culture to differentiate, to form alkaline phosphatase-positive colonies, and to mineralize. Ten UCLA abutments were cast in each of 4 alloys: Type III gold, ceramometal gold, commercially pure grade I titanium, and titanium-aluminum-vanadium (Ti-6Al-4V); 10 ceramic abutments and 30 sterile Brånemark System implants were also used. Five abutments of each material and 5 implants were incubated individually in rat bone marrow culture, as were 5 of each abutment attached to an implant; bone marrow cultures not containing test samples were used as controls. Following 17 days of culture, the solution potentials of individual abutments (except ceramic), the implant, and the implant-abutment couples were measured in the test medium. One dish of each group of 5 was then stained for bone nodule mineralization; the remainder were quantified by area for alkaline phosphatase staining. Statistical analysis of measured in vitro potentials showed that the uncoupled samples formed 2 groups, and coupled samples formed 3 groups. Analysis of variance for alkaline phosphatase-positive area values showed no significant differences between coupled or uncoupled groups and the control. Normal cell differentiation and morphology as well as a lack of zones of inhibition, were observed. Bone nodule mineralization was evident in all groups. It was concluded that the presence of these commonly used implant abutment biomaterials coupled to titanium endosseous dental implants had no adverse effects on the in vitro capacity of preosteoblasts in marrow to differentiate and to form mineralized bone nodules, despite measured differences in solution potentials.
منابع مشابه
Comparative Evaluation of Microleakage at the Interface of Titanium and Zirconium Abutments Following Oblique Cyclic Loading: An in vitro Study
Abstract Background and aim: Oral microbiota could proliferate the microspace between the implant and abutment, thereby cause inflammation in the peri-implant tissues and adjacent bone. This study aimed to investigate the effect of two types of abutments (zirconia and titanium) on microleakage at implant-abutment interface area under oblique cyclic loading in vitro. Materials and methods:In thi...
متن کاملComparative Evaluation of Microgap at the Interface of Titanium and Zirconium Abutments Following Oblique Cyclic Loading: An in vitro Study
Abstract Background and Aim : Microgap in the implant-abutment interface is one of the main challenges in the treatment of two-piece implants. This study aimed to investigate the effect of two types of abutments (zirconia and titanium) on microgap at implant-abutment interface area under oblique cyclic loading in vitro. Methods and Materials In this in vitro study, 12 implant-abutment assemb...
متن کاملمقایسه مقاومت شکست و نوع شکست اباتمنتهای زیرکونیایی مختلف در مقایسه با اباتمنتهای تیتانیومی
Background and Aims: One of the decisive factors on the final esthetic results of implant treatment is the abutment material. Ceramic abutments are nowadays very popular in this regard. The purpose of this study was to compare the fracture resistance of three zirconia abutments with titanium abutment. Materials and Methods: Four groups of abutments (five specimens in each) were prepared. The a...
متن کاملEvaluation of the Effect of Zirconia and Titanium Abutments on Microleakage of Implant-Abutment Interface Under Oblique Cyclic Loading In Vitro
Background and Aim: Oral bacteria can proliferate in the implant-abutment interface (IAI) and cause inflammation in the peri-implant tissues and adjacent bone. This study aimed to assess the effect of zirconia and titanium abutments on the microleakage of the IAI under oblique cyclic loading conditions. Materials and Methods: In this in-vitro study, 12 implant-abutment assemblies with zirconia...
متن کاملEffect of Abutment Angulation and Material on Stress and Strain Distributions in Premaxillary Bone: A Three-Dimensional Finite Element Analysis
Background and Aim: Dental implants with angled abutments are often inserted in the anterior maxillary region due to the status of the residual ridge and aesthetic considerations. The purpose of this study was to assess stress and strain distributions in the premaxillary bone around dental implants by means of finite element analysis (FEA). Materials and Methods: Four three-dimensional (3D) fi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The International journal of oral & maxillofacial implants
دوره 14 6 شماره
صفحات -
تاریخ انتشار 1999