Application of Lattice Boltzmann Method in Fluid Flow and Heat Transfer
نویسندگان
چکیده
منابع مشابه
Heat Transfer Enhancement of Al2O3–H2O Nanofluid Free Convection in Two-Phase Flow with Internal Heat Generation Using Two Dimensional Lattice Boltzmann Method
A two-phase lattice Boltzmann model considering the interaction forces of nanofluid has been developed in this paper. It is applied to investigate the flow and natural convection heat transfer of Al2O3–H2O nanofluid in an enclosure containing internal heat generation. To understand the heat transfer enhancement mechanism of the nanofluid flow from the particle level, the lattice Boltzmann metho...
متن کاملUsing Lattice Boltzmann Method to Investigate the Effects of Porous Media on Heat Transfer from Solid Block inside a Channel
A numerical investigation of forced convection in a channel with hot solid block inside a square porous block mounted on a bottom wall was carried out. The lattice Boltzmann method was applied for numerical simulations. The fluid flow in the porous media was simulated by Brinkman-Forchheimer model. The effects of parameters such as porosity and thermal conductivity ratio over flow pattern and t...
متن کاملLattice Boltzmann Simulation of Nanofluids Natural Convection Heat Transfer in Concentric Annulus (TECHNICAL NOTE)
Abstract This study is applied Lattice Boltzmann Method to investigate the natural convection flow utilizing nanofluids in a concentric annulus. A numerical strategy presents for dealing with curved boundaries of second order accuracy for both velocity and temperature fields. The fluid between the cylinders is a water-based nanofluid containing different types of nanoparticles: copper (Cu), a...
متن کاملEFFECT OF WAVY WALL ON CONVECTION HEAT TRANSFER OF WATER-AL2O3 NANOFLUID IN A LID-DRIVEN CAVITY USING LATTICE BOLTZMANN METHOD
Abstract In the present study, the effects of wavy wall’s properties on mixed convection heat transfer of Water-Al2O3 Nanofluid in a lid-driven cavity are investigated using the Lattice Boltzmann Method. The Boundary Fitting Method with second order accuracy at both velocity and temperature fields is used to simulate the curved boundaries in the LBM. The problem is investigated for different ...
متن کاملNumerical simulation of a three-layered radiant porous heat exchanger including lattice Boltzmann simulation of fluid flow
This paper deals with the hydrodynamic and thermal analysis of a new type of porous heat exchanger (PHE). This system operates based on energy conversion between gas enthalpy and thermal radiation. The proposed PHE has one high temperature (HT) and two heat recovery (HR1 and HR2) sections. In HT section, the enthalpy of flowing high temperature gas flow that is converted to thermal radiation em...
متن کاملMesoscopic Simulation of Forced Convective Heat Transfer of Carreau-Yasuda Fluid Flow over an Inclined Square: Temperature-dependent Viscosity
In the current study, non-Newtonian flow pattern and heat transfer in an enclosure containing a tilted square are examined. In order to numerically simulate the problem, the mesoscopic lattice Boltzmann method is utilized. The non-Newtonian Carreau-Yasuda model is employed. It is able to adequately handle the shear-thinning case. The simulation results of flow and heat transfer have been ...
متن کامل