Dynamic crushing and energy absorption of regular, irregular and functionally graded cellular structures

نویسندگان

  • Amin Ajdari
  • Hamid Nayeb-Hashemi
  • Ashkan Vaziri
چکیده

Please cite this article in press as: Ajdari, A., et a Int. J. Solids Struct. (2010), doi:10.1016/j.ijsolst The in-plane dynamic crushing of two dimensional honeycombs with both regular hexagonal and irregular arrangements was investigated using detailed finite element models. The energy absorption of honeycombs made of a linear elastic-perfectly plastic material with constant and functionally graded density were estimated up to large crushing strains. Our numerical simulations showed three distinct crushing modes for honeycombs with a constant relative density: quasi-static, transition and dynamic. Moreover, irregular cellular structures showed to have energy absorption similar to their counterpart regular honeycombs of same relative density and mass. To study the dynamic crushing of functionally graded cellular structures, a density gradient in the direction of crushing was introduced in the computational models by a gradual change of the cell wall thickness. Decreasing the relative density in the direction of crushing was shown to enhance the energy absorption of honeycombs at early stages of crushing. The study provides new insight into the behavior of engineered and biological cellular materials, and could be used to develop novel energy absorbent structures. 2010 Elsevier Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading

In this article, the results of a study on energy absorption characteristics of foam-filled thin-walled structures with finite element analysis have been presented. Four specimens of thin walled structures have been filled with uniform foam and three specimens have been filled with linear four-layered foam. Also, eight layers HLH (High-Low-High) and eight layers LHL (Low-High-Low) have been sim...

متن کامل

Crashworthiness design of multi-cell tapered tubes using response surface methodology

In this article, crashworthiness performance and crushing behavior of tapered structures with four internal reinforcing plates under axial and oblique dynamic loadings have been investigated. These structures have a tapered form with five cross sections of square, hexagonal, octagonal, decagon and circular shape. In the first step, finite element simulations performed in LS-DYNA were validated ...

متن کامل

Axial Crushing Analysis of Sandwich Thin-walled Tubes using Experimental and Finite Element Simulation

Application of impact energy absorption systems in different industries is of special significance. Thin-walled tubes, due to their lightness, high energy absorption capacity, long crushing length and the high ratio of energy absorption to weight, have found ever-increasing application as one of the most effective energy absorption systems. In this research, through  carrying out experimental t...

متن کامل

Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates

In this study, a dynamic stiffness method for free vibration analysis of moderately thick function-ally graded material plates is developed. The elasticity modulus and mass density of the plate are assumed to vary according to a power-law distribution in terms of the volume fractions of the constituents whereas Poisson’s ratio is constant. Due to the variation of the elastic properties through ...

متن کامل

Comparison of Seismic Behavior of Buckling-restrained Braces and Yielding Brace System in Irregular and Regular Steel Frames under Mainshock and Mainshock-Aftershock

Due to low stiffness of braces after yielding, the structures with buckling-restrained braces (BRBs) experience high residual drifts during an earthquake, which can be intensified by aftershocks and causes considerable damages to structures. Also, due to poor distribution of stiffness, this problem is exacerbated for irregular structures. Recently, the yielding brace system (YBS) has been intro...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010