Fabrication and Characterization of Large, Perfectly Periodic Arrays of Metallic Nanocups
نویسندگان
چکیده
Fabrication of plasmonic resonance devices composed of large arrays of highly ordered gold nanocups is presented. The nanostructures are generated from periodic photoresist templates created by interference lithography and subsequent reflow, deposition, and dislodging. The nanocups are hemispherical in shape and arranged in both rectangular and hexagonal arrays with periods of ~500 nm. Their ability to support surface plasmonic resonances is manifested experimentally by reflectance spectroscopy. Theoretical modeling to ascertain the plasmonic spectra of these nanostructures is performed. The computed spectra of the rectangular structure are in qualitative agreement with the measurements. A weaker correlation observed for the hexagonal structure is explained by its more intricate symmetry which complicates the spectral response.
منابع مشابه
Fabrication and Optical Characterization of Silicon Nanostructure Arrays by Laser Interference Lithography and Metal-Assisted Chemical Etching
In this paper metal-assisted chemical etching has been applied to pattern porous silicon regions and silicon nanohole arrays in submicron period simply by using positive photoresist as a mask layer. In order to define silicon nanostructures, Metal-assisted chemical etching (MaCE) was carried out with silver catalyst. Provided solution (or materiel) in combination with laser interference lithogr...
متن کاملFabrication of broadband antireflective plasmonic gold nanocone arrays on flexible polymer films.
Flexible broadband antireflective and light-absorbing nanostructured gold thin films are fabricated by gold vapor deposition onto Teflon films modified with nanocone arrays. The nanostructures are created by the oxygen plasma etching of polystyrene bead monolayers on Teflon surfaces. The periodicity and height of the nanocone arrays are controlled by the bead diameter and the overall etching ti...
متن کاملHigh-throughput patterning of photonic structures with tunable periodicity.
A patterning method termed "RIPPLE" (reactive interface patterning promoted by lithographic electrochemistry) is applied to the fabrication of arrays of dielectric and metallic optical elements. This method uses cyclic voltammetry to impart patterns onto the working electrode of a standard three-electrode electrochemical setup. Using this technique and a template stripping process, periodic arr...
متن کاملFabrication of Copper and Iron Nano/Micro Structures on Semiconducting Substrate and Their Electrical Characterization
In this paper, we have studied the electrical properties of the randomly distributed metallic (Co and Fe) nano/ micro wires on Silicon substrate. Deposition was carried out potentiostatically into the pores of the track-etch polycarbonate membrane spin coated onto the Si substrate. Spin coated films were irradiated with 150MeV Ni (+11) ions at a fluence of 8E7 ions/cm2, followed by UV irradiati...
متن کاملElectronic Properties of Metallic Nanoclusters on Semiconductor Surfaces: Implications for Nanoelectronic Device Applications
We review current research on the electronic properties of nanoscale metallic islands and clusters deposited on semiconductor substrates. Reported results for a number of nanoscale metal-semiconductor systems are summarized in terms of their fabrication and characterization. In addition to the issues faced in large-area metal-semiconductor systems, nano-systems present unique challenges in both...
متن کامل