Development of High Power X-Band Semiconductor RF Switch for Pulse Compression Systems of Future Linear Colliders
نویسندگان
چکیده
We describe development of semiconductor X-band high-power RF switches. The target applications are high-power RF pulse compression systems for future linear colliders. We describe the design methodology of the architecture of the whole switch systems. We present the scaling law that governs the relation between power handling capability and number of elements. We designed and built several active waveguide windows for the active element. The waveguide window is a silicon wafer with an array of four hundred PIN/NIP diodes covering the surface of the window. This waveguide window is located in an over-moded TE01 circular waveguide. The results of high power RF measurements of the active waveguide window are presented. The experiment is performed at power levels of a few megawatts at X-band.
منابع مشابه
High Power X-band Semiconductor Rf Switch for Pulse Compression Systems of Future Linear Colliders
We describe the potential of semiconductor X-band RF switch arrays as a means of developing high power RF pulse compression systems for future linear colliders. We describe design methodology of high power RF switches, and scaling law which governs the relation between power handling capability and number of elements. The design and implementation of the active waveguide window is presented. Th...
متن کاملWaveguide System ‘ to Accelerator I Cavities Multiplier
Proposed future positron-electron linear colliders’ would be capable of investigating fundamental processes of interest in the 0.5-5 TeV beam-energy range. At the SLAC Linear Collider (SLC) gradient of about 20 MV/m this would imply prohibitive lengths of about 50-250 kilometers per linac. We can reduce the length by increasing the _ gradient but this implies high peak power, on the order of 40...
متن کاملDevelopment And Advances In Conventional High Power RF Systems*
The development of rf systems capable of producing high peak power (hundreds of megawatts) at relatively short pulse lengths (0.1-5 microseconds) is currently being driven mainly by the requirements of future high energy linear colliders, although there may be applications to industrial, medical and research linacs as well. The production of high peak power rf typically involves four basic elem...
متن کاملAdvanced Rf Power Sources for Linacs*
In order to maintain a reasonable over-all length at high center-of-mass energy, the main linac of an electronpositron linear collider must operate at a high accelerating gradient. For copper (non-superconducting) accelerator structures, this implies a high peak power per unit length and a high peak power per RF source, assuming a limited number of discrete sources are used. To provide this pow...
متن کاملNew Development in RF Pulse Compression
Several pulse compression systems have been proposed for future linear collider. Most of these systems require hundreds of kilometers of low-loss waveguide runs. To reduce the waveguide length and improve the efficiency of these systems, components for multimoding, active switches and non-reciprocal elements are being developed. In the multimoded systems a waveguide is utilized several times by...
متن کامل