Corrosion performance of Ni-Cr-Fe alloys in geothermal hypersaline brines
نویسنده
چکیده
The early development of the Salton Sea geothermal resource proved that carbon steel tubulars do not provide satisfactory service life in the high-temperature, hypersaline brines. A large-scale corrosion test was designed to find the most cost-effective alloys for completing these wells. A series of Ni-Cr-Mo alloys were tested over several years in three production wells and two injection wells. The various alloys were made into 85⁄8 in. (22 cm) outside diameter by
منابع مشابه
Development of Metallic Hot Gas Filters
Successful development of metallic filters with high temperature oxidation/corrosion resistance for fly ash capture is a key to enabling advanced coal combustion and power generation technologies. Compared to ceramic filters, metallic filters can offer increased resistance to impact and thermal fatigue, greatly improving filter reliability. A beneficial metallic filter structure, composed of a ...
متن کاملCorrosion Performance of Fe-Cr-Ni Alloys in Artificial Saliva and Mouthwash Solution
Several austenitic stainless steels suitable for high temperature applications because of their high corrosion resistance and excellent mechanical properties were investigated as biomaterials for dental use. The steels were evaluated by electrochemical techniques such as potentiodynamic polarization curves, cyclic polarization curves, measurements of open circuit potential, and linear polarizat...
متن کاملThe electrochemical behaviour of various non-precious Ni and Co based alloys in artificial saliva.
Five non-precious Ni-Co based alloys were analyzed with respect to their corrosion behaviour. The correlation between the amount of the elements Cr, Mo, V and the corrosion behaviour, expressed by the PREN (pitting resistance equivalent number) index in the case of the allied steels, was extended for Ni-Cr and Co-Cr dental alloys characterization. Open circuit potential, corrosion current densi...
متن کاملThe Effect of Nickel Increasing and Aluminum Addition on Sulfidation Resistance of Fe-Ni-Cr Alloys (TECHNICAL NOTE)
In this research the effects of; increasing the amount of nickel and adding aluminum to create and prolong sulfidation resistance of Fe-Ni-Cr alloys have been investigated. Sulfidation tests were carried out at 1100°C in S/O bearing atmosphere. Prior to the tests, the specimens were annealed in argon at 1250°C for 8 hrs. Weight changes were measured and corroded deposits were analyzed byscannin...
متن کاملEffects of chemical composition on the corrosion of dental alloys.
The aim of this study was to determine the effect of the oral environment on the corrosion of dental alloys with different compositions, using electrochemical methods. The corrosion rates were obtained from the current-potential curves and electrochemical impedance spectroscopy (EIS). The effect of artificial saliva on the corrosion of dental alloys was dependent on alloy composition. Dissoluti...
متن کامل