Effect of Composition on Work Hardening Coefficient of Bismuth-Lead Binary Alloy
نویسندگان
چکیده
Abstract—In the present work, the alloy of Bismuth-lead is prepared on the basis of percentage of molecular weight 9:1, 5:5 and 1:9 ratios and grown by ZoneRefining Technique under a vacuum atmosphere. The EDAX of these samples are done and the results are reported. Micro hardness test has been used as an alternative test for measuring material’s tensile properties. The effect of temperature and load on the hardness of the grown alloy has been studied. Further the comparative studies of work hardening coefficients are reported.
منابع مشابه
The Effect of Chemical Composition on Wear and Microstructural Properties of Babbitt Coatings
Babbitt is a white silvery alloy that composed of Tin, Lead, Copper and Antimony. This alloy is the most current bearing alloy in industrial applications. The characteristics of this alloy, such as high wearing resistance and low coefficient of friction, have converted it into a bearing cover. The target of this study is investigation on the effects of alloy elements on wearing and micro-struct...
متن کاملThe Effect of Chemical Composition on Wear and Microstructural Properties of Babbitt Coatings
Babbitt is a white silvery alloy that composed of Tin, Lead, Copper and Antimony. This alloy is the most current bearing alloy in industrial applications. The characteristics of this alloy, such as high wearing resistance and low coefficient of friction, have converted it into a bearing cover. The target of this study is investigation on the effects of alloy elements on wearing and micro-struct...
متن کاملEffect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80
Rene-80 nickel-base superalloy as an alloy for production of the jet turbine blades shows high mechanical properties as well as microstructure stability during the high temperature engine operation. In this research, age hardening heat treatment cycle was done on the as-cast Rene-80 superalloy. In the following, microstructure, elemental analysis of phases and macro-hardness of the alloy before...
متن کاملAn Investigation Into the Effects of Friction and Anisotropy Coefficients and Work Hardening Exponent on Deep Drawing With FEM
Large strains, anisotropy of mechanical properties of materials and Coulomb friction in contact regions are some properties in the analysis of deep drawing process. In this research, the effects of different parameters such as anisotropy coefficient, work hardening exponent and friction coefficient on deep drawing process of drawing quality steel are studied. For this purpose, the finite elemen...
متن کاملAbnormal Plastic Behavior of Fine Grain Mp35n Alloy During Room Temperature Tensile Testing
In this paper, results of an investigation on the strain hardening responses of superalloy MP35N with two average grain sizes of 38 and 1 μm, during room temperature tensile testing are reported. The microstructural evolution of the deformed samples was studied using optical and transmission electron microscopy (TEM) techniques. The strain hardening behavior of the 38 μm material was rather sim...
متن کامل