Study on bending behaviour of nickel–titanium rotary endodontic instruments by analytical and numerical analyses
نویسندگان
چکیده
AIM To develop analytical models and analyse the stress distribution and flexibility of nickel-titanium (NiTi) instruments subject to bending forces. METHODOLOGY The analytical method was used to analyse the behaviours of NiTi instruments under bending forces. Two NiTi instruments (RaCe and Mani NRT) with different cross-sections and geometries were considered. Analytical results were derived using Euler-Bernoulli nonlinear differential equations that took into account the screw pitch variation of these NiTi instruments. In addition, the nonlinear deformation analysis based on the analytical model and the finite element nonlinear analysis was carried out. Numerical results are obtained by carrying out a finite element method. RESULTS According to analytical results, the maximum curvature of the instrument occurs near the instrument tip. Results of the finite element analysis revealed that the position of maximum von Mises stress was near the instrument tip. Therefore, the proposed analytical model can be used to predict the position of maximum curvature in the instrument where fracture may occur. Finally, results of analytical and numerical models were compatible. CONCLUSION The proposed analytical model was validated by numerical results in analysing bending deformation of NiTi instruments. The analytical model is useful in the design and analysis of instruments. The proposed theoretical model is effective in studying the flexibility of NiTi instruments. Compared with the finite element method, the analytical model can deal conveniently and effectively with the subject of bending behaviour of rotary NiTi endodontic instruments.
منابع مشابه
Mechanical behaviour of nickel-titanium rotary endodontic instruments in simulated clinical conditions: a computational study.
AIM To develop an accurate finite element (FE) model for studying rotary endodontic instruments and to demonstrate the usefulness of the FE method in improving the knowledge of the mechanical behaviour of these instruments during root canal preparation. METHODOLOGY An accurate geometrical model of a Ni-Ti ProTaper F1 instrument was created. The interaction between the rotating instrument and ...
متن کاملA numerical method for predicting the bending fatigue life of NiTi and stainless steel root canal instruments.
AIM To evaluate the bending fatigue lifetime of nickel-titanium alloy (NiTi) and stainless steel (SS) endodontic files using finite element analysis. METHODOLOGY The strain-life approach was adopted and two theoretical geometry profiles, the triangular (TR) and the square cross-sections, were considered. Both low-cycle fatigue (LCF) lifetime and high-cycle fatigue (HCF) lifetime were evaluate...
متن کاملFracture resistance of electropolished rotary nickel-titanium endodontic instruments.
The purpose of this study was to investigate the effect of electropolishing on cyclic flexural fatigue and torsional strength of rotary nickel-titanium endodontic instruments. Electropolished and nonelectropolished ISO size 30 (0.04 taper) EndoWave (J Morita Corporation, Osaka, Japan), ProFile (Dentsply Maillefer, Ballaigues, Switzerland), and RaCe (FKG, La-Chaux De Fonds, Switzerland) instrume...
متن کاملUltrasonic Treatment Endodontice
The aim of this study is to demonstrate the ability of our ultrasonic endodontic dental device with rotary nickel-titanium alloy instruments for the root canal treatment. This study is aimed at investigating the cleaning and shaping efficacy with “Ultrasonic device for endodontic treatment of dental’s canals. The purpose of root canal treatment is to get rid of the damaged pulp and the bacteria...
متن کامل