Effect of Extruder Screw Speed, Temperature, and Enzyme Levels on Sugar Recovery from Different Biomasses

نویسندگان

  • Chinnadurai Karunanithy
  • Kasiviswanathan Muthukumarappan
  • William R. Gibbons
چکیده

Biofuels from biomass have the potential to reduce the dependency on fossil fuels. An efficient pretreatment method is required to accomplish the target of the Energy Act 2005. Extrusion could be a viable continuous pretreatment method to be explored. The objectives of the current study were to investigate the influence of screw speed and barrel temperature on sugar recovery from the selected warm season grasses and to select a suitable enzyme combination and dose for enzymatic hydrolysis. The ground, moisture-balanced biomasses were pretreated using a single screw extruder at various screw speeds (100, 150, and 200 rpm) and barrel temperatures (50, 75, 100, 150, and 200°C). Cellulase or multienzyme with β-glucosidase was varied from 1 : 1 to 1 : 4 during enzymatic hydrolysis to accomplish the second objective. Screw speed, barrel temperature, and their interaction had a significant influence on sugar recovery from the selected biomasses. A maximum of 28.2, 66.2, and 49.2% of combined sugar recoverywasachieved for switchgrass, big bluestem, prairie cord grass when pretreated at a screw speed of 200, 200, and 150 rpm and at a barrel temperature of 75, 150, and 100°C, respectively, using cellulase and β-glucosidase at a ratio of 1 :  4. Extrusion pretreatment of these biomasses used only 28-37% of the rated extruder power.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

تأثیر گلوتن، دمای اکسترودر و دمای خشک کردن روی چسبندگی و خمیری شدن ماکارونی

Stickiness and pastiness after cooking is one of the basic problems of macaroni production technology. Investigation of the factors affecting stickiness and pastiness of Iranian Macaroni is essential. The purpose of this research was to study the effects of percentage of gluten in the flour as well as extruder and drying temperatures on the macaroni quality. The factors studied are as follows: ...

متن کامل

تأثیر گلوتن، دمای اکسترودر و دمای خشک کردن روی چسبندگی و خمیری شدن ماکارونی

Stickiness and pastiness after cooking is one of the basic problems of macaroni production technology. Investigation of the factors affecting stickiness and pastiness of Iranian Macaroni is essential. The purpose of this research was to study the effects of percentage of gluten in the flour as well as extruder and drying temperatures on the macaroni quality. The factors studied are as follows: ...

متن کامل

Effects of different temperature profiles and corn-sago starch ratios on physical properties of extruded tilapia diets

Sago starch is a locally grown and produced starch resource in Malaysia. In this study, corn starch to sago starch ratios (CS:SS) of 0:20, 5:15, 10:10, 15:5 and 20:0 were included in feed mixture to contain 20% starch and produce five isonitrogenous and isocaloric (30% crude protein and 16.7 kJ/g, respectively) tilapia Oreochromis sp. diets. Diets were preconditioned to contain 40% moisture and...

متن کامل

Effects of different temperature profiles and corn-sago starch ratios on physical properties of extruded tilapia diets

Sago starch is a locally grown and produced starch resource in Malaysia. In this study, corn starch to sago starch ratios (CS:SS) of 0:20, 5:15, 10:10, 15:5 and 20:0 were included in feed mixture to contain 20% starch and produce five isonitrogenous and isocaloric (30% crude protein and 16.7 kJ/g, respectively) tilapia Oreochromis sp < em>. diets. Diets were preconditioned to contain 40% moistu...

متن کامل

Effects of Extrusion Conditions on the Physicochemical Properties of Extruded Red Ginseng

The effects of variable moisture content, screw speed and barrel temperature on the physicochemical properties of red ginseng powder extrudates were investigated. The raw red ginseng powders were processed in a co-rotating intermeshing twin-screw extruder. Primary extrusion variables were feed moisture content (20 and 30%), screw speed (200 and 250 rpm) and barrel temperature (115 and 130°C). E...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 2013  شماره 

صفحات  -

تاریخ انتشار 2013