Statistical Load Modeling
نویسندگان
چکیده
This paper discusses the improvement of the statistical model that was developed in [6] by adding a new weather variable called sunshine. We also took into account other weather factors such as ambient temperature, humidity, wind speed, and sky cover as well as time factors such as the day of the week and the hour of the day. We developed a statistical model that describes the electric power demand during a summer period for close geographic areas that are called load pockets. The proposed method was evaluated on real data for several load pockets in the Northeastern part of the USA.
منابع مشابه
Short Term Load Forecasting by Using ESN Neural Network Hamedan Province Case Study
Abstract Forecasting electrical energy demand and consumption is one of the important decision-making tools in distributing companies for making contracts scheduling and purchasing electrical energy. This paper studies load consumption modeling in Hamedan city province distribution network by applying ESN neural network. Weather forecasting data such as minimum day temperature, average day temp...
متن کاملIn-Depth Study on Synthesis Load Modeling
Detailed procedures for the modeling of synthesis load models (SLM) of actual power network are presented, then the classification indices based on 1oad characteristics and the principle of load classification are expounded. Based on the results of general investigation of 220 kV and 330 kV substations in China’s power grid, the load characteristics are classified, and detailed load characteris...
متن کاملAggregate Static Power Load Modeling in Coalmine
-In order to overcome the defects of the traditional static load modeling in coalmine, a new modeling method is proposed in this paper. First, a new clustering method based on improved PSO algorithm is presented to classify the load data in order to reduce the number of load model before modeling. Second, RBF neural network based on improved PSO algorithm is put forward to establish aggregate l...
متن کاملDetermination of Load and Strain-Stress Distributions in Hot Closed Die Forging Using the Plasticine Modeling Technique
An axisymmetric hot closed die-forging process has been studied by physical modeling technique using the plasticine. To observe the material flow pattern, layers of plasticine with different colors were used. The normal direction to the layers was considered a principal direction. The strain distribution was obtained by measuring the thickness of the plasticine layers. Based on the strain distr...
متن کاملInduction Motor Electric Parameters Estimation Using Artificial Neural Networkds and its Application in industrial Load Modeling
Load modeling is widely used in power system studies. Two types of modeling, namely, static and dynamic, are employed. The current industrial practice is the static modeling. Static modelss are algebraic equations of active and reactive power changes in terms of voltage and frequency deviations. In this paper, a component based on static modeling is employed in which the aggregate model is deri...
متن کامل