Multi-Service Highly Sensitive Rectifier for Enhanced RF Energy Scavenging
نویسندگان
چکیده
Due to the growing implications of energy costs and carbon footprints, the need to adopt inexpensive, green energy harvesting strategies are of paramount importance for the long-term conservation of the environment and the global economy. To address this, the feasibility of harvesting low power density ambient RF energy simultaneously from multiple sources is examined. A high efficiency multi-resonant rectifier is proposed, which operates at two frequency bands (478-496 and 852-869 MHz) and exhibits favorable impedance matching over a broad input power range (-40 to -10 dBm). Simulation and experimental results of input reflection coefficient and rectified output power are in excellent agreement, demonstrating the usefulness of this innovative low-power rectification technique. Measurement results indicate an effective efficiency of 54.3%, and an output DC voltage of 772.8 mV is achieved for a multi-tone input power of -10 dBm. Furthermore, the measured output DC power from harvesting RF energy from multiple services concurrently exhibits a 3.14 and 7.24 fold increase over single frequency rectification at 490 and 860 MHz respectively. Therefore, the proposed multi-service highly sensitive rectifier is a promising technique for providing a sustainable energy source for low power applications in urban environments.
منابع مشابه
Enhanced Passive RF-DC Converter Circuit Efficiency for Low RF Energy Harvesting
For radio frequency energy transmission, the conversion efficiency of the receiver is decisive not only for reducing sending power, but also for enabling energy transmission over long and variable distances. In this contribution, we present a passive RF-DC converter for energy harvesting at ultra-low input power at 868 MHz. The novel converter consists of a reactive matching circuit and a combi...
متن کاملAntenna Design and Non Linear Simulation of Rectifier for Wideband and Multi-Tone Radio Frequency Energy Harvesting
In this paper, a wideband rectenna without using matching networks is presented. In addition of wide bandwidth, the omnidirectional radiation pattern, maximum radio frequency to dc conversion efficiency, harvesting capability of the minimum input power level, easy fabrication process cause this antenna be a good choice for radio frequency energy harvesting applications. Matching network has bee...
متن کاملA Long-Distance RF-Powered Sensor Node with Adaptive Power Management for IoT Applications
We present a self-sustained battery-less multi-sensor platform with RF harvesting capability down to -17 dBm and implementing a standard DASH7 wireless communication interface. The node operates at distances up to 17 m from a 2 W UHF carrier. RF power transfer allows operation when common energy scavenging sources (e.g., sun, heat, etc.) are not available, while the DASH7 communication protocol...
متن کاملDesign of an Efficient Rectifier Circuit for RF Energy Harvesting System
An efficient rectifier system along with an impedance matching network is proposed in this article. Impedance matching network is designed using two microstrip lines. Rectifier system for better RF to DC conversion is designed using a bridge rectifier. The proposed rectifier system provides a maximum efficiency of 50%. The impedance matching network improves the overall system performances sign...
متن کاملDesign of impedance matching circuits for RF energy harvesting systems
This paper presents a systematic design methodology for impedance matching circuits of an RF energy harvester to maximize the harvested energy for a range of input power levels with known distribution. Design of input matching networks for RF rectifier differs from those for traditional RF circuits such as low-noise amplifier because the transistors in the RF rectifiers operate in different reg...
متن کامل