Rolling Shear Properties of Cross Laminated
نویسندگان
چکیده
1 College of Materials Science and Engineering, Nanjing Forestry University, 159 6 Longpan Road, Nanjing, Jiangsu, China 210037. 7 2 Faculty of Forestry and Environmental Management, University of New 8 Brunswick, 28 Dineen Drive, Fredericton, New Brunswick, Canada E3B 5A3. 9 * Corresponding author: [email protected] 10 Received: July 08, 2017 11 Accepted: March 02, 2018 12 Posted online: March 06, 2018 13
منابع مشابه
The Effect of Cold Rolling Process on the Microstructure and Texture Evolution in a 1 wt. % Si Non-oriented Electrical Steel
In this study, the effect of cold rolling process on the microstructure and texture evolution in 1wt. % Si non-oriented electrical steel was investigated. For this purpose, all samples were processed through single-stage hot rolling at 1100 ° C and two-stage cold rolling (cross rolling and unidirectional rolling) with intermediate annealing at 650 °C for 35 seconds. Finally, all of them were fu...
متن کاملNew Method of Determination for Pressure and Shear Frictions in the Ring Rolling Process as Analytical Function
Ring rolling is one of the most significant methods for producing rings with highly precise dimensions and superior qualities such as high strength uniformity, all accomplished without wasting any materials. In this article, we have achieved analytical formulas for calculating the pressure and shear friction over the contact arcs between the rollers and ring in the ring rolling process for the ...
متن کاملA Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories
An analytical and numerical solution for the free vibration of laminated polymeric composite plates with different layups is studied in this paper. The governing equations of the laminated composite plates are derived from the classical laminated plate theory (CLPT) and the first-order shear deformation plate theory (FSDT). General layups are evaluated by the assumption of cross-ply and angle-p...
متن کاملDynamic Buckling of Embedded Laminated Nanocomposite Plates Based on Sinusoidal Shear Deformation Theory
In this study, the dynamic buckling of the embedded laminated nanocomposite plates is investigated. The plates are reinforced with the single-walled carbon nanotubes (SWCNTs), and the Mori-Tanaka model is applied to obtain the equivalent material properties of them. Based on the sinusoidal shear deformation theory (SSDT), the motion equations are derived using the energy method and Hamilton's p...
متن کاملBending Analysis of Laminated Composite Plates with Arbitrary Boundary Conditions
It is well known that for laminated composite plates a Levy-type solution exists only for cross-ply and antisymmetric angle-ply laminates. Numerous investigators have used the Levy method to solve the governing equations of various equivalent single-layer plate theories. It is the intension of the present study to introduce a method for analytical solutions of laminated composite plates with ar...
متن کامل