Sampling criterion for nonlinear systems with a bandpass input
نویسنده
چکیده
Sampling requirements for nonlinear systems with a bandpass input are developed in this paper. It is well known that the output of a nonlinear system may have a larger bandwidth than that of the input. According to the Nyquist sampling theorem, the sampling rate needs to be at least twice the maximum frequency of the output to avoid aliasing. However, if the input is a bandpass signal, the spectrum of the output is usually distributed over several frequency bands. In this case, using the bandpass sampling concept, it is possible to sample the output at a much lower rate. In this paper, conditions for such a lower sampling rate to exist are derived for nonlinear systems up to the third order. Supporting computer simulation is also provided.
منابع مشابه
Fractal Bandpass Filter Using Y-shaped Dual-Mode Resonator for C-Band Receiver (Research Note)
In this study, a fractal, Y-shaped dual-mode resonator bandpass filter (BPF) with input-output cross-coupling is introduced. A parallel-coupling feed structure with a cross coupling has been used to generate two transmission zeroes (TZs) near the lower and upper cutoff frequency that can effectively improve the passband edge selectivity. Also, a fractal shaped based on conventional diamond and ...
متن کاملDetermination of Gain and Phase Margins in Lur’e Nonlinear Systems using Extended Circle Criterion
Nonlinearity is one of the main behaviors of systems in the real world. Therefore, it seems necessary to introduce a method to determine the stability margin of these systems. Although the gain and phase margins are established criteria for the analysis of linear systems, finding a specific way to determine the true value of these margins in nonlinear systems in general is an ongoing research i...
متن کاملInput-output stability analysis of networked control systems
Nygren, J. 2016. Input-Output Stability Analysis of Networked Control Systems. Uppsala Dissertations from the Faculty of Science and Technology 119. 147 pp. Uppsala: Acta Universitatis Upsaliensis. ISBN 978-91-554-9452-0. The main focus of the thesis is to derive stability criteria for networked control system (NCS) models featuring imperfections such as time-varying and constant delays, quanti...
متن کاملAdaptive fuzzy pole placement for stabilization of non-linear systems
A new approach for pole placement of nonlinear systems using state feedback and fuzzy system is proposed. We use a new online fuzzy training method to identify and to obtain a fuzzy model for the unknown nonlinear system using only the system input and output. Then, we linearized this identified model at each sampling time to have an approximate linear time varying system. In order to stabilize...
متن کاملA Linear Matrix Inequality (LMI) Approach to Robust Model Predictive Control (RMPC) Design in Nonlinear Uncertain Systems Subjected to Control Input Constraint
In this paper, a robust model predictive control (MPC) algorithm is addressed for nonlinear uncertain systems in presence of the control input constraint. For achieving this goal, firstly, the additive and polytopic uncertainties are formulated in the nonlinear uncertain systems. Then, the control policy can be demonstrated as a state feedback control law in order to minimize a given cost funct...
متن کامل