Design and realisation of integrated inductor with low DC-resistance value for integrated power applications
نویسندگان
چکیده
This paper presents a new topology of inductor allowing a decrease of the conductor serial resistance. After validating the concept of conductors interleaving, technological process flow and results are presented.
منابع مشابه
An Integrated CMOS DC-DC Converter for Battery-Operated Systems
Abstract -This paper presents an optimum design for low-voltage, low-power DC-DC converter which has a controller and integrated CMOS switches using small size inductor (luH). Optimum design for single chip DC/DC converter is achieved by analyzing the amount of conduction and switching losses. Through the loss analyses, it is turned out that a constant frequency hard switching PWM converter wit...
متن کاملPCB Integrated Inductors for Low Power DC/DC Converter
This paper discusses the use of printed circuit board (PCB) integrated inductors for low power dc/dc buck converters. Coreless, magnetic plates and closed core structures are compared in terms of achievable inductance, power handling and efficiency in a footprint of 10 10mm. The magnetic layers consist of electroplated NiFe, so that the process is fully compatible with standard PCB process. Ana...
متن کاملDesign of Gate-Driven Quasi Floating Bulk OTA-Based Gm–C Filter for PLL Applications
The advancement in the integrated circuit design has developed the demand for low voltage portable analog devices in the market. This demand has increased the requirement of the low-power RF transceiver. A low-power phase lock loop (PLL) is always desirable to fulfill the need for a low power RF transceiver. This paper deals with the designing of the low power transconductance- capacitance (Gm-...
متن کاملFiltering Power Divider/Combiner Based on Half Mode Substrate Integrated Waveguide (HMSIW) Technology for High Power Applications
A filtering power divider/power combiner based on half mode substrate integrated waveguide technology for high power applications is proposed. This design includes one half mode substrate integrated waveguide cavity, one matched load, and four sections of quarter-wavelength transmission lines. The high isolation between output ports is obtained by combining the half mode substrate integrated wa...
متن کاملLLC Resonant Converter: Analysis and Design
Inductor Inductor Capacitor (LLC) resonant converter has gained attention of researchers and engineers these days High efficiency, power density and Reliability. LLC resonant converter is most suitable resonant converter for front end DC-DC applications. Integrated magnetic, ZVS and high frequency operation, make the converter more compact and efficient. In this paper brief analysis of the LLC ...
متن کامل