Effects of Cl Addition to Sb-Doped Perovskite-Type CH3NH3PbI3 Photovoltaic Devices
نویسندگان
چکیده
The effects of SbI3, PbCl2, and NH4Cl addition to perovskite CH3NH3PbI3 precursor solutions on photovoltaic properties were investigated. TiO2/CH3NH3Pb(Sb)I3(Cl)-based photovoltaic devices were fabricated by a spin-coating technique, and the microstructures of the devices were investigated by X-ray diffraction and scanning electron microscopy. Current density-voltage characteristics and incident photon-to-current conversion efficiencies were improved by a small amount of Sband Cl-doping, which resulted in improvement of the efficiencies of the devices. The structure analysis indicated formation of a homogeneous microstructure by NH4Cl addition with SbI3.
منابع مشابه
افزایش پایداری سلولهای خورشیدی با استفاده از لایههای جاذب پروسکایتی CH3NH3PbI3 آلاییده با برم
The CH3NH3PbI3 is one of the most widely used and famous lead halide perovskite absorber layer for using in perovskite solar cells. One of the ways to deal with the instability problem of this perovskite structure in environmental condition is bromide doping in this composition. In this work, the structural and optical properties of the bromide doped CH3NH3PbI3 absorber layers were studied as w...
متن کاملFabrication and Characterization of CH3NH3PbI3-x-yBrxCly Perovskite Solar Cells
Fabrication and characterization of CH3NH3PbI3 ́x ́yBrxCly perovskite solar cells using mesoporous TiO2 as electron transporting layer and 2,21,7,71-tetrakis-(N,N-di-4-methoxypheny lamino)-9,91-spirobifluorene as a hole-transporting layer (HTL) were performed. The purpose of the present study is to investigate role of halogen doping using iodine (I), bromine (Br) and chlorine (Cl) compounds as do...
متن کاملEnhanced performance of CH3NH3PbI3−xClx perovskite solar cells by CH3NH3I modification of TiO2-perovskite layer interface
In this work, perovskite solar cells (PSCs) with CH3NH3PbI3-x Cl x as active layer and spiro-OMeTAD as hole-transport media have been fabricated by one-step method. The methylammonium iodide (CH3NH3I) solution with different concentrations is used to modify the interface between mesoporous TiO2 (meso-TiO2) film and CH3NH3PbI3-x Cl x perovskite layer. Several techniques including X-ray diffracti...
متن کاملRelativistic GW calculations on CH3NH3PbI3 and CH3NH3SnI3 Perovskites for Solar Cell Applications
Hybrid AMX3 perovskites (A = Cs, CH3NH3; M = Sn, Pb; X = halide) have revolutionized the scenario of emerging photovoltaic technologies, with very recent results demonstrating 15% efficient solar cells. The CH3NH3PbI3/MAPb(I(1-x)Cl(x))3 perovskites have dominated the field, while the similar CH3NH3SnI3 has not been exploited for photovoltaic applications. Replacement of Pb by Sn would facilitat...
متن کاملEffect of Chlorine Substitution on Lattice Distortion and Ferroelectricity of CH3NH3PbI3
As a prototype of organic−inorganic hybrid perovskites, CH3NH3PbI3 is attracting extensive attention because of its applications in high-power-conversion-efficiency solar cells. However, the mixedhalide perovskite CH3NH3PbI3−xClx exhibited superior carrier diffusion properties in recent experiments. Using first-principles calculations and the Berry phase method, we calculated the crystal struct...
متن کامل