Analysis and computations for a model of quasi-static deformation of a thinning sheet arising in superplastic forming
نویسندگان
چکیده
We consider a mathematical model for the quasi-static deformation of a thinning sheet. The model couples a first-order equation for the thickness of the sheet to a prescribed curvature equation for the displacement of the sheet. We prove a local in time existence and uniqueness theorem for this system when the sheet can be written as a graph. A contact problem is formulated for a sheet constrained to be above a mould. Finally we present some computational results.
منابع مشابه
Failure Prediction during uniaxial Superplastic Tension using Finite Element Method
Superplastic materials show a very high ductility. This is due to both peculiar process conditions and material intrinsic characteristics. However, a number of superplastic materials are subjected to cavitation during superplastic deformation. Evidently, extensive cavitation imposes significant limitations on their commercial application. The deformation and failure of superplastic sheet metals...
متن کاملMinimization of the Sheet Thinning in Hydraulic Deep Drawing Process Using Response Surface Methodology and Finite Element Method
In most of the sheet forming processes, production of the parts with minimum thickness variation and low required force is important. In this research, minimization of the sheet thinning and forming force in the hydraulic deep drawing process has been studied. Firstly, the process is simulated using the finite element method (FEM) and simulation model is verified using the experimental results....
متن کاملForming of Multi layer Sheet Metal by Drawing Process: an Analysis and FEM Simulation
In this paper, the drawing process of multi-layer sheet metal through wedge shaped die has been analyzed using stream function and upper bound method. Typically a sandwich sheet contains three layers of metal, where the outer layers are of the same thickness and material and different from those of the inner layer. In this study, a new deformation model has been introduced in which inlet and ou...
متن کاملAnalytical Modeling of Axi-Symmetric Sheet Metal Forming
The cup drawing is a basic deep drawing process. Thus, understanding the mechanics ofthe cup drawing process helps in determining the general parameters that affect the deep drawingprocess. There are mainly two methods of analysis; experimental and analytical/numerical.Experimental analysis can be useful in analyzing the process to determine the process parameters thatproduce a defect free prod...
متن کاملFEM SIMULATION OF NON-AXISYMMETRIC STRETCH FLANGE FORMING OF ALUMINUM ALLOY 5052 BASED ON SHELL TYPE ELEMENTS
Finite element simulation of stretch flanging process was carried out in order to investigate the effect of process parameters on maximum thinning (%) in stretch flanging process. Influences of initial flange length, punch die clearance, width of sheet metal blank and blank holding force were investigated on maximum thinning (%). Finite element simulation was done using FEM software package ABA...
متن کامل