Terahertz electromagnetic crystal waveguide fabricated by polymer jetting rapid prototyping.
نویسندگان
چکیده
An all-dielectric THz waveguide has been designed, fabricated and characterized. The design is based on a hollow-core electromagnetic crystal waveguide, and the fabrication is implemented via polymer-jetting rapid prototyping. Measurements of the waveguide power loss factor show good agreement with simulation. As an initial example, a waveguide with propagation loss of 0.03 dB/mm at 105 GHz is demonstrated.
منابع مشابه
Electromagnetic Crystal (EMXT) based THz Components
Various all-dielectric electromagnetic crystal (EMXT) based THz components, including filter/reflector, waveguide, antenna, and transition structure to planar circuits are proposed and simulated. Several of them have been fabricated via a THz rapid prototyping technique, and the measurements show very good consistency with the simulations. Potential integrated THz micro-systems could be constru...
متن کاملRapid and inexpensive fabrication of terahertz electromagnetic bandgap structures.
Modern rapid prototyping technologies are now capable of build resolutions that allow direct fabrication of photonic structures in the GHz and THz frequency regimes. To demonstrate this, we have fabricated several structures with 3D electromagnetic bandgaps in the 100-400 GHz range. Characterization of these structures via THz Time-domain Spectroscopy (THz-TDS) shows very good agreement with si...
متن کاملEnhanced four-wave mixing in graphene-silicon slow-light photonic crystal waveguides
Articles you may be interested in Optimizing terahertz surface plasmons of a monolayer graphene and a graphene parallel plate waveguide using one-dimensional photonic crystal Wideband group velocity independent coupling into slow light silicon photonic crystal waveguide Appl. Electro-optic polymer infiltrated silicon photonic crystal slot waveguide modulator with 23 dB slow light enhancement Ap...
متن کاملUnified picture of modal loss rates from microwave to optical frequencies in deep-subwavelength metallic structures: A case study with slot waveguides
Articles you may be interested in High efficiency coupling of radio frequency beams from the dual frequency gyrotron with a corrugated waveguide transmission system Rev. Dual cylindrical metallic grating-cladding polymer hollow waveguide for terahertz transmission with low loss Appl. Magnetic metal cladding gives better attenuation in small waveguides operating at high microwave frequencies tha...
متن کاملTHz-Wave Generation from GaP THz Photonic Crystal Waveguides under Difference-Frequency Mixing
GaP terahertz (THz) two-dimensional (2D) photonic crystal (PC) waveguides with line defects were fabricated using inductively-coupled plasma reactive-ion etching (ICP-RIE) in Ar/Cl2 gas chemistries. THz-wave generation from the fabricated PC waveguides was demonstrated under collinear phase-matched difference-frequency generation (DFG), using Cr:Forsterite (Cr:F) lasers as the incident source. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 19 5 شماره
صفحات -
تاریخ انتشار 2011