Maximum likelihood calibration of a magnetometer using inertial sensors
نویسندگان
چکیده
Magnetometers and inertial sensors (accelerometers and gyroscopes) are widely used to estimate 3D orientation. For the orientation estimates to be accurate, the sensor axes need to be aligned and the magnetometer needs to be calibrated for sensor errors and for the presence of magnetic disturbances. In this work we use a grey-box system identification approach to compute maximum likelihood estimates of the calibration parameters. An experiment where the magnetometer data is highly disturbed shows that the algorithm works well on real data, providing good calibration results and improved heading estimates. We also provide an identifiability analysis to understand how much rotation is needed to be able to solve the calibration problem.
منابع مشابه
Probabilistic modeling for positioning applications using inertial sensors
In this thesis, we consider the problem of estimating position and orientation (6D pose) using inertial sensors (accelerometers and gyroscopes). Inertial sensors provide information about the change in position and orientation at high sampling rates. However, they suffer from integration drift and hence need to be supplemented with additional sensors. To combine information from the inertial se...
متن کاملCalibration of an Inertial Accelerometer using Trained Neural Network by Levenberg-Marquardt Algorithm for Vehicle Navigation
The designing of advanced driver assistance systems and autonomous vehicles needs measurement of dynamical variations of vehicle, such as acceleration, velocity and yaw rate. Designed adaptive controllers to control lateral and longitudinal vehicle dynamics are based on the measured variables. Inertial MEMS-based sensors have some benefits including low price and low consumption that make them ...
متن کاملInterconnected maximum likelihood estimator and extended Kalman filter for inertial measurement unit calibration fusing three-dimensional camera information
This article presents a method for calibration of inertial sensors (gyroscopes and accelerometers). In the proposed selfcalibration method, interacted extended Kalman filter and maximum likelihood estimator are applied for estimation of motion state parameters and calibration parameters (biases and scaling factors), respectively. The extended Kalman filter is employed to estimate nonlinear Gaus...
متن کاملA New Approach to Self-Localization for Mobile Robots Using Sensor Data Fusion
This paper proposes a new approach for calibration of dead reckoning process. Using the well-known UMBmark (University of Michigan Benchmark) is not sufficient for a desirable calibration of dead reckoning. Besides, existing calibration methods usually require explicit measurement of actual motion of the robot. Some recent methods use the smart encoder trailer or long range finder sensors such ...
متن کاملComplete Tri-Axis Magnetometer Calibration with a Gyro Auxiliary
Magnetometers combined with inertial sensors are widely used for orientation estimation, and calibrations are necessary to achieve high accuracy. This paper presents a complete tri-axis magnetometer calibration algorithm with a gyro auxiliary. The magnetic distortions and sensor errors, including the misalignment error between the magnetometer and assembled platform, are compensated after calib...
متن کامل