Effect of Fuel Type on Flame Ignition by Transient Plasma Discharges
نویسندگان
چکیده
Rise and delay times of mixtures of methane, propane, n-butane, iso-butane and isooctane mixed with air ignited by transient plasma discharge were investigated and compared with spark discharge ignition. Multi-ignition site effect and high electron energy are suggested to contribute to shortening of rise and delay times.
منابع مشابه
Premixed flame ignition by transient plasma discharges
Flame ignition by short-duration (≈ 50 ns) transient plasma, or corona, discharges was investigated for methane-air, propane-air and butane-air mixtures at atmospheric and elevated pressures. Such discharges produce a larger fraction of high-energy electrons, yield more spatially distributed energy and deposit energy in the gas more efficiently than conventional arc discharges do. We show that ...
متن کاملDirect ignition and S-curve transition by in situ nano-second pulsed discharge in methane/ oxygen/helium counterflow flame
A well-defined plasma assisted combustion system with novel in situ discharge in a counterflow diffusion flame was developed to study the direct coupling kinetic effect of non-equilibrium plasma on flame ignition and extinction. A uniform discharge was generated between the burner nozzles by placing porous metal electrodes at the nozzle exits. The ignition and extinction characteristics of CH4/...
متن کاملFlame Stabilization Using a Pulsed Plasma Discharge in Subsonic Flow
Stable combustion in a harsh environment, such as lean fuel concentration and/or low temperature conditions, is attractive because of its low emissions. However, such flames suffer from lack of stability. In our research, an AC plasma discharge is applied to a lifted jet flame to increase the stability of the flame. Two types of discharges are utilized for this experiment. First, a single elect...
متن کاملNumerical Prediction of Air-preheating Effect on Soot Formation in Diffusion Flame During Early Transience Following Ignition
A CFD-based numerical model has been developed for the determination of the volume concentration and number density of soot in a laminar diffusion flame of methane in air, under transient condition following ignition of the flame. The transience is studied from the point of ignition till the final steady state is reached. The burner is an axi-symmetric co-flowing one with the fuel issuing throu...
متن کاملPlasma-assisted combustion*
This paper presents an overview of experimental and numerical investigations of the nonequilibrium cold plasma generated under high overvoltage and further usage of this plasma for plasma-assisted combustion. Here, two different types of the discharge are considered: a streamer under high pressure and the so-called fast ionization wave (FIW) at low pressure. The comprehensive experimental inves...
متن کامل