The new 1.8 l TFSI engIne From AudI Part 1: Base engine and thermomanagement
ثبت نشده
چکیده
The launch of the new 1.8 l TFSI engine marks the third generation of the successful four-cylinder gasoline engine family from Audi. It has been completely revised in order to meet ambitious CO2 targets and ensure compliance with future Euro 6 emissions standards. The new generation features numerous innovative technologies, including an exhaust gas cooling system integrated into the cylinder head, a dual fuel injection system with direct and portfuel injection as well as the Audi valvelift system with twin camshaft adjustment. A new-style fully electronic coolant control also enables an innovative thermomanagement system to be implemented. This first part of the article details the base engine and the thermomanagement system of the new engine. The second part of the article, which will be published in MTZ 7 / 8, covers the mixture formation, the combustion method and the turbocharging. Industry GASOlInE EnGInES
منابع مشابه
Enhancement of a Diesel Engine Inlet Port for Pollutant Reduction and Performance Optimization
This research uses computational modeling to explore another method to increase diesel engine performance while maintaining low pollutant emission levels. Previous studies have shown that injection-rate profiles and injector configurations play important roles on the performance and emissions of particulate and NOx in DI diesel engines. Since the most important engine design parameters, includi...
متن کاملIntegration of exhaust manifold with engine cylinder head towards size and weight reduction
In this research, a new exhaust manifold and its cooling jackets is first designed for the integrated exhaust manifold into cylinder head (IEMCH) for a turbocharged engine. Then, the gas exchange and flow analysis is carried out numerically to evaluate the proper conditions for the exhaust gas and the coolant stream respectively. Finally, the entire engine parts are thermally analyzed to assure...
متن کاملReformer Gas Application in Combustion Onset Control of HCCI Engine
Homogenous charge compression ignition (HCCI) combustion is spontaneous multi-site combustion of a nominally premixed air/fuel mixture that exhibits high rate of pressure rise and short combustion duration. To avoid excessive pressure rise rate and knocking, HCCI engines are fueled with highly diluted mixture using a combination of excess air and/or EGR. HCCI combustion is attractive due to ...
متن کاملConversion of Diesel Engine to Port Injection CNG Engine Using Gaseous Injector Nozzle Multi Holes Geometries Improvement: A Review
This paper is the representation of the computational and experimental methods of a new injector nozzle for a sequential port injection CNG engine. The objective of this study was to review the previous research in the development of gaseous fuel injector for port injection CNG engine converted from diesel engine. Next, a simulation of the fuel flow of the new injector nozzle was made using FLU...
متن کاملStudy of the performance in dual fuels 50% gasoline -50% NG and single original fuels and comparison in part load
One of the most efficient methods to reduce emissions and fuel costs of SI engines in petrol case, is the use of combined gasoline and NG. The ability of an engine is usually expressed with maximum power and maximum torque output of full-load state, but the operating time of the engines with full-load is less than that of part-load time. Therefore, studying the performance of the engine with a ...
متن کامل