Sequence Analysis of Finite Position Machine Fpm
نویسندگان
چکیده
Logic control is an integral part of manufacturing systems. The creation and debugging of the logic control represents a significant amount of the effort needed to design a large manufacturing system. Today's rapidly shifting markets have greatly reduced the life of a product design and the manufacturing system to produce it. As a result reconfigurable manufacturing systems are being developed which are capable of producing different parts over its life. These systems will need control logic, which is capable of being easily reconfigured as the system changes. This work describes the analysis of Finite Position Machines (FPMs) for reconfigurable manufacturing systems thought VS Tree method. VS tree allows to create feasible Pattern structures, whose basically are systems of communicating finite position machines which represent safe reactive processes and allow behavior description.
منابع مشابه
Using Finite Point Method for the Numerical Simulation of Heat Transfer Coupled with Microsegregation during Continuous Casting
In the present work, a meshless method called Finite Point Method (FPM) is developed to simulate the solidification process of a continuously cast steel bloom in both primary and secondary cooling regions. The method is based on the use of a weighted least-square interpolation procedure. A transverse slice of the bloom moving at casting speed is considered as the computational domain and two di...
متن کاملLot Streaming in No-wait Multi Product Flowshop Considering Sequence Dependent Setup Times and Position Based Learning Factors
This paper considers a no-wait multi product flowshop scheduling problem with sequence dependent setup times. Lot streaming divide the lots of products into portions called sublots in order to reduce the lead times and work-in-process, and increase the machine utilization rates. The objective is to minimize the makespan. To clarify the system, mathematical model of the problem is presented. Sin...
متن کاملMatrix-product structure of repeated-root constacyclic codes over finite fields
For any prime number p, positive integers m, k, n satisfying gcd(p, n) = 1 and λ0 ∈ F × pm, we prove that any λ p 0 -constacyclic code of length p n over the finite field Fpm is monomially equivalent to a matrix-product code of a nested sequence of p λ0-constacyclic codes with length n over Fpm.
متن کاملMatrix-product structure of constacyclic codes over finite chain rings $\mathbb{F}_{p^m}[u]/\langle u^e\rangle$
Let m, e be positive integers, p a prime number, Fpm be a finite field of p elements and R = Fpm [u]/〈u 〉 which is a finite chain ring. For any ω ∈ R and positive integers k, n satisfying gcd(p, n) = 1, we prove that any (1+ωu)-constacyclic code of length pn over R is monomially equivalent to a matrix-product code of a nested sequence of p cyclic codes with length n over R and a p × p matrix Ap...
متن کاملCompressive Behavior of a Glass/Epoxy Composite Laminates with Single Delamination
The buckling and postbuckling behaviors of a composite beam with single delamination are investigated. A three-dimensional finite element model using the commercial code ANSYS is employed for this purpose. The finite elements analyses have been performed using a linear buckling model based on the solution of the eigenvalues problem, and a non-linear one based on an incremental-iterative method....
متن کامل