Direct Methanol Fuel Cells: History, Status and Perspectives
نویسندگان
چکیده
s, October 30-November, Portland, Oregon, pp. 75–78.71 Iwasita, T., Nart, F.C. and Vielstich, W.(1990) Ber. Bunsenges Phys. Chem., 94 (9), 1030–1034.72 Rolison, D.R., Hagans, P.L., Swider, K.L.and Long, J.W. (1999) Langmuir, 15 (3), 774–779.73 Aricò, A.S., Monforte, G., Modica, E., Antonucci, P.L. and Antonucci, V. (2000)Electrochem. Commun., 2 (7), 466–470.74 Hamnett, A., Kennedy, B.J. and Wagner,F.E. (1990) J. Catal., 124 (1), 30–40.75 Aricò, A.S., Cretì, P., Modica, E., Monforte, G., Baglio, V. andAntonucci, V.(2000) Electrochim. Acta, 45 (25–26), 4319–4328.76 Aricò, A.S., Baglio, V., Di Blasi, A., Modica, E., Antonucci, P.L. and72j 1 Direct Methanol Fuel Cells: History, Status and Perspectives
منابع مشابه
Synthesis of Sulfonated Polystyrene/acrylate–ionic Liquid (Si-SPS/A–IL) Hybrid Membranes for Methanol Fuel Cells
In this paper, the silicon-containing sulfonated polystyrene/acrylate–ionic liquid (Si-SPS/A–IL)hybrid membranes was prepared to obtain the proton exchange membrane (PEM) materials withhigh methanol barrier and good selectivity. The Si-SPS/A–IL hybrid membranes characterized asthe function of IL to evaluate their potential as PEMs in direct methanol fuel cells (DMFCs).Fourdifferent Hybrid mater...
متن کاملFabrication and Characterization of a Conductive Proton Exchange Membrane Based on Sulfonated Polystyrenedivinylbenzene Resin-Polyethylene (SPSDR-PE): Application in Direct Methanol Fuel Cells
A novel proton exchange membrane has been prepared using sulfonated poly(styrene-divinylbenzene) resin(SPSDR)–polyethylene(PE). The membrane is characterized by FT-IR, SEM and TGA/DSC. Water uptake, oxidative resistance, ionic conductivity and methanol permeability are measured to evaluate its performance in a direct methanol fuel cell. The on-set degradation temp...
متن کاملOne –step synthesis of PdCo alloy nanoparticles decorated on reduced grahene oxide as an Electro-catalyst for Oxygen Reduction Reaction in Passive Direct Methanol Fuel Cells
We report a Pd-Co (3:1)/graphene oxide (Pd3Co /GO) catalyst through a one-step strategy. GO is synthesized from graphite electrodes using ionic liquid-assisted electrochemical exfoliation. Controllable GO-supported Pd3Co electrocatalystis then was reduced by ethylene glycol as a stabilizing agent to prepare highly dispersed PdCo nanoparticles on carbon graphene oxide to be used as oxygen reduct...
متن کاملModified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane
A novel Nafion®-based nanocomposite membrane was synthesized to be applied as direct methanol fuel cells (DMFCs). Carbon nanotubes (CNTs) were coated with a layer of silica and then reacted by chlorosulfonic acid to produce sulfonate-functionalized silicon dioxide coated carbon nanotubes (CNT@SiO2-SO3H). The functionalized CNTs were then introduced to Nafion®, and subsequently, methanol permeab...
متن کاملOptimal Concentration Control for Direct Methanol Fuel Cells
Two modifications to a reference direct methanol fuel-cell (DMFC) system are considered to improve methanol fuel utilisation. Fuel utilisation can be optimised by minimising the parasitic methanol crossover by manipulating methanol concentration in the fuel cells. Simulations of the two systems indicate that there is considerable potential to increase fuel utilisation for dynamic concentration ...
متن کامل