Monitoring fatigue crack growth and opening using antenna sensors

Fatigue cracking is one of the most common failure modes of various load-bearing structures. Even though sensors of many different types have been developed for crack detection, very few can monitor crack growth with a high sensitivity. This paper presents an antenna sensor that is capable of monitoring the growth of fatigue cracks with a sub-millimeter resolution. According to microstrip patch antenna theory, the resonant frequencies of a dual-frequency patch antenna are inversely proportional to the electrical lengths of the corresponding antenna radiation modes. The presence of a crack in the ground plane or the elongation of the antenna patch due to crack opening increases the electric length, thereby causing a shift in its corresponding resonant frequency. As a result, crack propagation and opening can be monitored from the resonant frequency shifts of the patch antenna. The patch antenna’s capability of monitoring crack growth was validated using fatigue testing of a compact tension specimen. The specimen preparation, sensor fabrication, and experimental procedure are presented. The experimental results demonstrated that the corresponding resonant frequency of the antenna sensor shifted linearly with crack growth. On average, 1 mm crack growth caused the antenna frequency to shift by 22.1 MHz. The orientation of the crack and the effect of crack closure on the resonant frequencies of the antenna sensor are also discussed. (Some figures in this article are in colour only in the electronic version)