Improvement of oxide quality by rapid thermal annealing in N2
نویسندگان
چکیده
Related Articles Oxygen-vacancy-mediated negative differential resistance in La and Mg co-substituted BiFeO3 thin film J. Appl. Phys. 110, 124102 (2011) Impurity impact ionization avalanche in p-type diamond Appl. Phys. Lett. 99, 202105 (2011) Field dependent electrical conduction in HfO2/SiO2 gate stack for before and after constant voltage stressing J. Appl. Phys. 110, 084104 (2011) Pre-breakdown negative differential resistance in thin oxide film: Conductive-atomic force microscopy observation and modelling J. Appl. Phys. 110, 034104 (2011) Enhancing the electron mobility via delta-doping in SrTiO3 Appl. Phys. Lett. 97, 222115 (2010)
منابع مشابه
Synthesis of large-area and aligned copper oxide nanowires from copper thin film on silicon substrate
Large-area and aligned copper oxide nanowires have been synthesized by thermal annealing of copper thin films deposited onto silicon substrate. The effects of the film deposition method, annealing temperature, film thickness, annealing gas, and patterning by photolithography are systematically investigated. Long and aligned nanowires can only be formed within a narrow temperature range from 400...
متن کاملInvestigation of Structural, Morphological and Optical Properties of Chromium Oxide Thin Films Prepared at Different Annealing Times
Chromium oxide (α-Cr2O3) thin films were prepared using thermal annealing of chromium (Cr)films deposited on quartz substrates by direct current (DC) magnetron sputtering. The annealingprocess of the films was performed for different times of 60, 120,180 and 240 min. The influenceof annealing time on structural, morphological and optical properties of the prepared films wasinvestigated by diffe...
متن کاملRapid Thermal Anneal of Gate Oxides for Low Thermal Budget TFT's - Electron Devices, IEEE Transactions on
The performance and reliability of deposited gate oxides for thin film transistors (TFT’s) has been studied as a function of rapid thermal annealing (RTA) conditions. The effect of temperature ranging from 700 to 950 C and the annealing ambients including oxygen (O2); argon (Ar), and nitrous oxide (N2O) is investigated. Improvement in charge to breakdown (Qbd) is seen starting from 700 C, with ...
متن کاملStudy of Aluminum Oxide Films Deposited using Thermal ALD and Effect of Low Thermal Budget Annealing
Thermal ALD deposited Al2O3 films on silicon show marked difference in surface passivation quality as a function of annealing time (using rapid thermal process). An effective and quality passivation is realized in short anneal duration (~100s) which is reflected in the low surface recombination velocity (SRV <10 cm/s). The deduced values are close to the best reported SRV obtained by high therm...
متن کاملFormation of Cupric Oxide Films on Quartz Substrates by Annealing the Copper Films
In the present work, cupric oxide (CuO) films were obtained through thermal annealing of the copper (Cu) films deposited on quartz substrates by DC magnetron sputtering method. The annealing was performed in air atmosphere for different times ranging from 60-240 min at temperature of 400 ºC. The influence of annealing times on structural and morphological properties of the films was investi...
متن کامل