The impact of CMOS scaling projected on a 6b full-Nyquist non-calibrated flash ADC
نویسندگان
چکیده
. A 6-bit 1.2 Gs/s non-calibrated flash ADC in a standard 45nm CMOS process, that achieves 0.45pJ/conv-step at full Nyquist bandwidth, is presented. Power efficient operation is achieved by a full optimization of amplifier blocks, and by innovations in the comparator and encoding stage. The performance of a non-calibrated flash ADC is directly related to device properties; a scaling analysis of our ADC in and across CMOS technologies gives insight into the excellent usability of 45nm technology for AD converter design.
منابع مشابه
A 5.5mW 6b 5GS/s 4×-Interleaved 3b/cycle SAR ADC in 65nm CMOS
Communication devices such as 60GHz-band receivers and serial links demand power-efficient low-resolution gigahertz-sampling-rate ADCs. However, the energy efficiency of ADCs is degraded by scaling up transistor widths in the building blocks for high speed, thus increasing the impact of intrinsic parasitics. Parallel schemes like multi-bit processing and interleaving [1], can ease the problems ...
متن کاملReducing the Power Consumption in Flash ADC Using 65nm CMOS Technology
Today, given the extensive use of convertors in industry, reducing the power consumed by these convertors is of great importance. This study presents a new method to reduce consumption power in Flash ADC in 65nm CMOS technology. The simulation results indicate a considerable decrease in power consumption, using the proposed method. The simulations used a frequency of 1 GHZ, resulting in decreas...
متن کاملA 1.2GSPS 6b Low Power Flash ADC in 0.13μm CMOS for Multi- Gigabit Wireless Communication System
A high-speed low-power flash analog-to-digital converter is designed and optimized in a 0.13μm CMOS technology. The ADC consumes 65mW with a supply voltage of 1.2V at 1.2G samples per second. Static DNL and INL are 0.1 LSB and 0.2LSB respectively. The figure of merit shows 1.3pJ per conversion step. The simulation result of the full flash ADC shows improvement in nonlinearity and power dissipat...
متن کاملReducing the Consumption Power in Flash ADC Using 65nm CMOS Technology
This paper presents a new method to reduce consumption power in flash ADC in 65nm CMOS technology. This method indicates a considerable reduction in consumption power, by removing comparators memories. The simulations used a frequency of 1 GHZ, resulting in decreased consumption power by approximately 90% for different processing corners. In addition, in this paper the proposed method was desig...
متن کاملA SoC based low power 8-bit flash ADC in 45 nm CMOS technology
In modern VLSI design the transistor sizing and scaling has an considerable impact. There are very essential two constrains, which needs serious attention to the VLSI chip designer are high speed and low power consumption. Therefore in this paper an 8-bit 3 Gs/sec flash analog-to-digital converter (ADC) in 45nm CMOS technology is presented for low power and high speed system-on-chip (SoC) appli...
متن کامل