Adhesion of Respiratory-Infection-Associated Microorganisms on Degradable Thermoplastic Composites
نویسندگان
چکیده
The purpose of this study was to evaluate bacterial adhesion and early colonization on a composite consisting of bioactive glass (BAG) particles and copolymer of epsilon-caprolactone/D,L-lactide. Materials were incubated with suspensions of both type strains and clinical isolates of Streptococcus pneumoniae, Haemophilus influenzae, and Pseudomonas aeruginosa for 30 minutes (adhesion) and 4 hours (colonization). Clear differences exist in the microorganisms' ability to adhere on the experimental materials. However, the presence of BAG particles does not inhibit bacterial adhesion, but early colonization of the materials with P. aeruginosa was inhibited by the addition of 90-315 mum BAG particles.
منابع مشابه
Anisotropy of Reinforcement Fibres and Its Influence on the Apparent Interfacial Shear Strength in Thermoplastic Composites
Optimization of the stress transfer capability of the fibre-matrix interphase region is critical to achieving the required performance level in thermoplastic matrix composites. Despite the ever increasing diversity of the reinforcements available for polymer composites, glass fibres still account for 95% of fibre reinforcements used in the composites industry, primarily due to of their highly a...
متن کاملOverview of Flax Fiber Reinforced Thermoplastic Composites
Flax fibres are oftenly used for reinforcing thermoplastic to manufacture biocomposite materials exhibiting numerous advantages such as high mechanical properties, low density and biodegradability. The mechanical properties of a biocomposite material depends on the nature and orientation of the fibres, the nature of the matrix and mainly on the adhesion between fiber and the polymer matrix. The...
متن کاملwood-thermoplastic interaction: microstructure and mechanical adhesion
The main objective of the research presented here was to relate anatomical features of wood species that affect the interactions between polymeric phases and performance of wood plastic composites (WPC). These interactions were related to the probable interlocking volume and surface area for stress transfer in a WPC. Composites were produced from different wood species and analyzed using SEM (s...
متن کاملThermal Degradation, Mechanical Properties and Morphology of Wheat Straw Flour Filled Recycled Thermoplastic Composites
Thermal behaviors of wheat straw flour (WF) filled thermoplastic compositeswere measured applying the thermogravimetric analysis and differential scanningcalorimetry. Morphology and mechanical properties were also studied using scanningelectron microscope and universal testing machine, respectively. Presence of WF inthermoplastic matrix reduced the degradation temperature of the composites. One...
متن کاملNanocomposite Coating Based on Thermoplastic Acrylic Resin and Montmorillonite Clay: Preparation and Corrosion Prevention Properties
Different amounts of nanoclay were incorporated into the acrylic resin matrix at 0, 1, 3, and 5 wt.% loadings. The coatings were applied on low carbon steel plates. Optical microscopy, sedimentation test, transmission electron microscopy, and X-ray diffraction were employed to investigate the dispersion of nanoclay in matrix. The corrosion resistance of coatings was evaluated by electrochemical...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 2009 شماره
صفحات -
تاریخ انتشار 2009