SCANNING ELECTRON MICROSCOPE STUDY OF CRACKS AND PORES IN CRYSTALLINE ROCKS by EVE SILVER SPRUNT
نویسنده
چکیده
Scanning Electron Microscope Study of Cracks and Pores in Crystalline Rocks
منابع مشابه
Failure analysis of an intake valve in a gasoline engine
This paper presents a failure analysis on a failed intake valve in a gasoline engine. During an endurance test, an intake valve was broken and caused some damages on the piston. Material examinations (by a light microscope and also a scanning electron microscope) were conducted on the fracture surface of the intake valve shaft. Results showed that no pores or defects could be observed and the m...
متن کاملThermal properties and morphology changes in degradation process of poly(L-lactide-co-glycolide) matrices with risperidone.
Determining thermal properties and morphology seems to be useful in the analysis of release and degradation processes form polymeric materials. Risperidone is available in the formulation of a long-acting injection based on poly(D,L-lactide-co-glycolide). Currently, alternative solutions are also offered, i.e., nano- and microparticles or implants, including copolymers of lactide and glycolide....
متن کاملShock Processes in Porous Quartzite: Transmission Electron Microscope Observations and Theory
A high-resolution study of shocked Coconino Sandstone from Meteor Crater, Arizona, was undertaken using transmission electron microscopy to investigate the textural relations of high-pressure phases produced by meteorite impact. In weakly shocked rocks (estimated average pressure, P < 100 kb), quartz in the interiors of grains retains its initial microstructure, but near original grain boundari...
متن کاملTribological Properties of B4C-Ni Cermet Coating Produced by HVOF Process on the Surface of 4130 Steel
In this research, B4C-Ni cermet coating was sprayed on the surface of 4130 steel from B4C and Ni feed-stockpowders using high velocity oxy-fuel (HVOF) method. In order to characterize the tribological behavior of thecoating, ball on disk wear tests were done at the ambient temperature and under the loads of 1, 3 and 5 N.Phase analysis of the coating after spraying was studied ...
متن کاملEstimate the Effective Elastic Properties of Digitized Porous Rocks by Inverting the Cracks Unresolved
Current imaging technique such as micro X-ray CT can provide us detailed 3D micro-structures of porous rocks that can be used in numerical simulation so as to predict elastic properties of rocks saturated with different fluids. However, limited by the resolution the imaging process can provide, we usually lose the small features of rocks such as cracks and micro-pores, consequences of which can...
متن کامل