Alternative Technique for Biodiesel Quality Control Using an Optical Fiber Long- Period Grating Sensor
نویسندگان
چکیده
Rosane Falate Departamento de Informática, Universidade Estadual de Ponta Grossa, Av. General Carlos Cavalcanti, 4748, 84030-900 Ponta Grossa – PR, Brasil Karen Nike and Pedro Ramos da Costa Neto Departamento de Química, Universidade Tecnológica Federal do Paraná, Av. 7 de Setembro 3165, 80230-901 Curitiba – PR, Brasil Eduardo Cação Jr., Marcia Muller, Hypolito José Kalinowski and José Luís Fabris Departamento de Física, Universidade Tecnológica Federal do Paraná, Av. 7 de Setembro 3165, 80230-901 Curitiba – PR, Brasil
منابع مشابه
Highly sensitive optical response of optical fiber long period gratings to nanometer-thick ionic self-assembled multilayers
Ionic self-assembled multilayers deposited on long period fiber gratings sLPGsd yield dramatic resonant-wavelength shifts, even with nanometer-thick films. Fine control of the refractive index and the thickness of these films was achieved by altering the relative fraction of the anionic and cationic materials combined with layer-by-layer deposition. We demonstrate the feasibility of this highly...
متن کاملA Notched Long-Period Fiber Grating Magnetic Field Sensor Based on Nanoparticle Magnetic Fluid
In this paper, we propose using an inductively coupled plasma (ICP) etching technique to fabricate a notched long-period fiber grating (NLPFG) for magnetic sensing application. An optical fiber magnetic field sensor based on NLPFG filled with nanoparticle magnetic fluid is proposed and demonstrated. The magnetic fluid nanoparticles were attached on the grating structure section and used as a ma...
متن کاملFabrication of a compact reflective long-period grating sensor with a cladding-mode-selective fiber end-face mirror.
A long-period grating (LPG) based compact optical fiber sensor working in reflection mode is demonstrated. A technique to make a mirror on the cladding region of a fiber end-face to reflect only the cladding modes was realized by growing a polymeric microtip on the core region of the fiber end-face, by photopolymerization, followed by coating the fiber end-face with an aluminum film. Using the ...
متن کاملFabrication and Characterization of the Fiber Optical Taper for a Surface Plasmon Resonance Sensor
For a fiber optical surface plasmon resonance (SPR) sensor a short part of its cladding should be removed to coat a thin layer of a metal. Usually this is problematic when an optical fiber with small core diameter is used. In this paper, a new method using µliter droplet of the HF acid for short fiber optical taper fabrication is reported. Using this method in a multi-mode optical fiber w...
متن کاملPolarization Dependence Suppression of Optical Fiber Grating Sensor in a π-Shifted Sagnac Loop Interferometer
In the sensing applications of optical fiber grating, it is necessary to reduce the transmission-type polarization dependence to isolate the sensing parameter. It is experimentally shown that the polarization-dependent spectrum of acousto-optic long-period fiber grating sensors can be suppressed in the transmission port of a π-shifted Sagnac loop interferometer. General expressions for the tran...
متن کامل