Ultrasensitive vector bending sensor based on multicore optical fiber.
نویسندگان
چکیده
In this Letter, we demonstrate a compellingly simple directional bending sensor based on multicore optical fibers (MCF). The device operates in reflection mode and consists of a short segment of a three-core MCF that is fusion spliced at the distal end of a standard single mode optical fiber. The asymmetry of our MCF along with the high sensitivity of the supermodes of the MCF make the small bending on the MCF induce drastic changes in the supermodes, their excitation, and, consequently, on the reflected spectrum. Our MCF bending sensor was found to be highly sensitive (4094 pm/deg) to small bending angles. Moreover, it is capable of distinguishing multiple bending orientations.
منابع مشابه
Long period grating in multicore optical fiber: an ultra-sensitive vector bending sensor for low curvatures.
Long period grating was UV inscribed into a multicore fiber consisting of 120 single mode cores. The multicore fiber that hosts the grating was fusion spliced into a single mode fiber at both ends. The splice creates a taper transition between the two types of fiber that produces a nonadiabatic mode evolution; this results in the illumination of all the modes in the multicore fiber. The spectra...
متن کاملFiber optic sensors based on strongly coupled multicore fiber
We report on the use of a multi-core fiber (MCF) for accurate sensing of temperature, strain, bending, and vibrations in real-world environments and under harsh conditions including temperatures up to 1000 oC. OCIS codes: (060.2370) Fiber optics sensors; (280.4788) Optical sensing and sensors; (060.4005) Microstructured fibers; (060.2280) Fiber design and fabrication.
متن کاملMiniature multicore optical fiber vibration sensor.
We demonstrate a compact and versatile interferometric vibration sensor that operates in reflection mode. To build the device, a short segment of symmetric strongly coupled multicore optical fiber (MCF) is fusion spliced to a single-mode optical fiber (SMF). One end of the MCF segment is cleaved and placed in a cantilever position. Due to the SMF-MCF configuration, only two supermodes are excit...
متن کاملBending sensor combining multicore fiber with a mode-selective photonic lantern.
A bending sensor is demonstrated using the combination of a mode-selective photonic lantern (PL) and a multicore fiber. A short section of three-core fiber with strongly coupled cores is used as the bend sensitive element. The supermodes of this fiber are highly sensitive to the refractive index profiles of the cores. Small bend-induced changes result in drastic changes of the supermodes, their...
متن کاملIntegrated optical fiber shape senor modules based on twisted multicore fiber grating arrays
In this paper we report on the development of a complete integrated optical fiber assembly suitable for shape sensing. Our shape sensor module consists of a length (>1m) of twisted multicore optical fiber with fiber Bragg gratings inscribed along its length. Our fiber has a compact 180 micron coated diameter, a twist of 50 turns per meter and grating reflectivities greater than 0.01% per cm of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics letters
دوره 41 4 شماره
صفحات -
تاریخ انتشار 2016