The 13th International Conference on Flow Processing in Composite Materials on the Influence of Mechanical and Processing Characterization on the Vibro-acoustic Response of Lcm and Preimpregnated Composite Laminates
نویسندگان
چکیده
Department of Building and Industrial Production Engineering, University CEU Cardenal Herrera Avda.Seminario s/n, 46113, Moncada, Valencia, Spain Email: [email protected], [email protected], [email protected], [email protected] (*corresponding author), web page: http://www.uchceu.es Departamento de Ingeniería Mecánica y de Materiales, Universidad Politécnica de Valencia, Spain Email: [email protected], [email protected], web page: http://www.upv.es Aerox Advanced Polymers Pol. Ind. La Pobla, La Eliana C/ Ausias March, Parcela no 13 46185, Pobla Vallbona, Valencia, Spain Email: [email protected], web page: http://www.aerox.es
منابع مشابه
Mechanical Characterization of Glass-Basalt-Carbon/Polyester Hybrid Composites
Influence of the stacking sequences of hybrid composites on the tensile strength, flexural strength, inter-laminar shear strength (ILSS) and impact energy was investigated. The hybrid glass-basalt-carbon/polyester composite laminates were processed by hand lay-up procedure at room temperature. The fracture surface of the composite laminates after the tension and flexural test was examined by sc...
متن کاملThe Effect of Nanoclay on Damaged Areas of Composite and Nanocomposite Laminates
The influence of nanoclay on the impact damage resistance of glass fiber–epoxy composites has been investigated using high-velocity repeated ice impact tests. The incorporation of nanoclay into epoxy enhances the impact resistance of the composites. The impact of ice is a realistic scenario for composite structures such as aircraft fuselages, wing skins and fan blades and it is not a completely...
متن کاملMeasurement of Variation in Fracture Strength and Calculation of Stress Concentration Factor in Composite Laminates with Circular Hole
In this research, residual strength and stress concentration factor of laminated composites with a circular open hole are studied analytically, numerically and experimentally. The numerical study was carried out using the finite element method. Moreover an analytical study was carried out with developing of point stress criterion. Mechanical testing was performed to determine the un-notched ten...
متن کاملInvestigating the effect of tool dimension and rotational speed on microstructure of Al-B4C surface composite layer produced by friction stir processing (FSP)
Friction stir processing (FSP) was used for the fabrication of Al-B4C surface composite. Al-Mg-Si alloy was considered as the substrate and B4C particles were incorporated into the substrate by thermo-mechanical effect of FSP. The effect of tool dimensions and different rotational speeds on the microstructure and microhardness of the composite layers was evaluated and the optimum process parame...
متن کاملFabrication, Characterization and Osteoblast Response of Cobalt-Based Alloy/Nano Bioactive Glass Composites
IIn this work, cobalt-based alloy/ nano bioactive glass (NBG) composites with 10, 15 and 20 wt% NBG were prepared and their bioactivity after immersion in simulated body fluid (SBF) for 1 to 4 weeks was studied. The scanning electron microscopy images of two- step sintered composites revealed a relatively dense microstructure the density of which decreased with the increase in the NBG amount. M...
متن کامل