Certification of NIST SRM 1961: 30 μm Diameter Polystyrene Spheres

نویسندگان

  • Arie W. Hartman
  • Theodore D. Doiron
  • Gary G. Hembree
چکیده

This report describes the certification of SRM 1961, an NIST Standard Reference Material for particle diameter. It consists of an aqueous suspension of monosize 30 μm diameter polystyrene spheres. The primary technique used optical microscopy; it gave a mean diameter value [Formula: see text] and a standard deviation of the size distribution σD = 0.21 μm. Over 2000 spheres were measured. The supporting technique used electron microscopy, which yielded [Formula: see text]. Ninety spheres were measured.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Certification of NIST SRM 1962: 3 μm Diameter Polystyrene Spheres

This report describes the certification of SRM 1962, a NIST Standard Reference Material for particle diameter. It consists of an aqueous suspension of monosize 3 (μm polystyrene spheres. Two calibration techniques were used: optical microscopy and electron microscopy. The first one gave a mean diameter of [Formula: see text] μm and a standard deviation of the size distribution σD = 0.020 μm, ba...

متن کامل

Re-Analysis of the Uncertainty of the 0.895 µm Diameter (NIST SRM® 1690) and the 0.269 µm Diameter (NIST SRM® 1691) Sphere Standards

The uncertainties of the mean diameters of the nominal 1.0 µm SRM(®) 1690 polystyrene spheres and of the nominal 0.3 µm SRM(®) 1691 polystyrene spheres are recomputed using the current NIST Guidelines for computing uncertainty. The revised expanded uncertainty (approximately 95 % confidence level) for SRM(®) 1690 polystyrene spheres is equal to 0.005 µm compared to previous value of 0.008 µm. T...

متن کامل

Use of the Electrostatic Classification Method to Size 0.1 μm SRM Particles—A Feasibility Study

The use of the electrostatic classification method for sizing monodisperse 0.1 μm polystyrene latex (PSL) spheres has been investigated experimentally. The objective was to determine the feasibility of using electrostatic classification as a standard method of particle sizing in the development of a 0.1 μm particle diameter Standard Reference Material (SRM). The mean particle diameter was calcu...

متن کامل

Certification of SRM1960: Nominal 10 μm Diameter Polystyrene Spheres (“Space Beads”)

Experimental, theoretical, and calculational details are presented for the three independent micrometrology techniques used to certify the mean diameter of Standard Reference Materisd 1960, nominal 10 μm diameter polystyrene spheres ("space beads"). The mean diameters determined by the three techniques agreed remarkably well, with all measurements within 0.1% of each other, an unprecedented ach...

متن کامل

NIST Standard Reference Material 3600: Absolute Intensity Calibration Standard for Small-Angle X-ray Scattering

The certification of a new standard reference material for small-angle scattering [NIST Standard Reference Material (SRM) 3600: Absolute Intensity Calibration Standard for Small-Angle X-ray Scattering (SAXS)], based on glassy carbon, is presented. Creation of this SRM relies on the intrinsic primary calibration capabilities of the ultra-small-angle X-ray scattering technique. This article descr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 96  شماره 

صفحات  -

تاریخ انتشار 1991