High Performance FPGA Implementation of Double Precision Floating Point Adder/Subtractor
نویسندگان
چکیده
Floating Point (FP) arithmetic is widely used in large set of scientific and signal processing computation. Adder/subtractor is one of the common arithmetic operation in these computation. The design of FP adder/subtractor is relatively complex than other FP arithmetic operations. This paper has shown an efficient implementation of adder/subtractor module on a reconfigurable platform, which is both area as well as performance optimal. The proposed design has optimized the individual complex components of adder module (like dynamic shifter, leading one detector (LOD), priority encoder), to achieve the better overall implementation. Comparison with the best reported work has been shown in the paper, which proves the merits of proposed design.
منابع مشابه
An Implementation of Double precision Floating point Adder & Subtractor Using Verilog
The floating point operations are critical to implement on FPGAs due to their complexity of their algorithms. Thus, many scientific problems require floating point arithmetic with high levels of accuracy in their calculations. Therefore, in this paper the proposed work is explored FPGA implementation of Addition/Subtraction for IEEE double precision floating point numbers. This kind of unit can...
متن کاملFpga Based Implementation of Double Precision Floating Point Adder/subtractor Using Verilog
Floating Point operations is widely used in many areas, especially in signal processing. The greater dynamic range and lack of need to scale the numbers makes development of algorithms much easier. However, implementing arithmetic operations for floating point numbers in hardware is very difficult. The IEEE floating point standard defines both single precision (32-bit) and double precision (64-...
متن کاملImplementation of single precision floating point square root on FPGAs
Square root operation is hard to implement on FPGAs because of the complexity of the algorithms. In this paper, we present a non-restoring square root algorithm and two very simple single precision floating point square root implementations based on the algorithm on FPGAs. One is low-cost iterative implementation that uses a traditional adder/subtractor. The operation latency is 25 clock cycles...
متن کاملDesign and Implementation of Low Power Floating Point Unit Using Reconfigurable Data Path: a Survey
Floating point arithmetic is widely used in many areas especially scientific computation and signal processing. The main objective of this paper is to reduce the power consumption and to increase the speed of execution and the implementation of floating point multiplier using sequential processing on the reconfigurable hardwareFloating Point (FP) addition, subtraction and multiplication are wid...
متن کاملVLSI Implementation of High Resolution High Speed Low Latency Pipeline Floating point Adder/Subtractor for FFT Applications
This paper presents on-chip implementation of high speed low latency floating point adder /subtractor with high accuracy performance for FFT in OFDM transceiver. However due to high performance and high resolution, the floating point adder is matched with power network applications as well. The design was implemented for 32-bit pipelined adder/subtractor which satisfied IEEE-754 Standard for fl...
متن کامل