Online Monitoring Rheological Property of Polymer Melt during Injection Molding
نویسنده
چکیده
Abstract—The detection of the polymer melt state during manufacture process is regarded as an efficient way to control the molded part quality in advance. Online monitoring rheological property of polymer melt during processing procedure provides an approach to understand the melt state immediately. Rheological property reflects the polymer melt state at different processing parameters and is very important in injection molding process especially. An approach that demonstrates how to calculate rheological property of polymer melt through in-process measurement, using injection molding as an example, is proposed in this study. The system consists of two sensors and a data acquisition module can process the measured data, which are used for the calculation of rheological properties of polymer melt. The rheological properties of polymer melt discussed in this study include shear rate and viscosity which are investigated with respect to injection speed and melt temperature. The results show that the effect of injection speed on the rheological properties is apparent, especially for high melt temperature and should be considered for precision molding process.
منابع مشابه
Preparation and Rheological Property Evaluation of LDPE/ Zinc Oxide Nanocomposite Films for Food Packaging Application
Nowadays, nanoscale innovations in the forms of pathogen detection, active packaging, antimicrobial packaging and barrier formation are poised to elevate food packaging to new heights. Antimicrobial nanocomposite LDPE films containing ZnO nanoparticles at different concentrations (e.g. 1%, 3%, 5% and 3% nano-ZnO pulse 10% polyethylene grafted maleic anhydride (PE-g-MA), w/w pure LDPE), were p...
متن کاملPreparation and Rheological Property Evaluation of LDPE/ Zinc Oxide Nanocomposite Films for Food Packaging Application
Nowadays, nanoscale innovations in the forms of pathogen detection, active packaging, antimicrobial packaging and barrier formation are poised to elevate food packaging to new heights. Antimicrobial nanocomposite LDPE films containing ZnO nanoparticles at different concentrations (e.g. 1%, 3%, 5% and 3% nano-ZnO pulse 10% polyethylene grafted maleic anhydride (PE-g-MA), w/w pure LDPE), were p...
متن کاملElectron beam irradiation method to change polypropylene application: Rheology and thermomechanical properties
Irradiation of polymers is one of the most effective and economical methods for modifying their properties and for changing their applications. In this study, an extrusion grade polypropylene (PP) was treated by electron beam irradiation to produce a PP suitable for injection molding. Irradiation was carried out at different doses (0-80 kGy) under atmosphere air and at ambient temperature. Melt...
متن کاملSimulation and Injection Molding of Ring-Shaped Polymer Bonded Nickel Braze Metal Composite Preforms Based on Rheological and Thermal Analyses
Rheological and thermal properties of LD-PE and LD-PE + 65 vol% Ni composite were examined by viscosity, pvt and thermal conductivity measurements at a wide range of shear rate, temperature and pressure. The typical shear-thinning viscosity of LD-PE polymer melt was enhanced up to four times by adding 65 vol% Ni braze metal particles. LD-PE show increasing specific volume versus temperature, de...
متن کاملPrimary Experimental Study on Microcellular Injection Molding Using Newly-developed Equipment
Microcellular injection molding using supercritical fluid (SCF) as blowing agent attracts more and more interests. There are still many difficulties in microcellular injection molding, such as decreasing equipment cost, controlling cellular morphology, and increasing feasibility. In this work, primary microcellular injection molding experiments were carried out on newly-developed equipment, whi...
متن کامل