A 2.4 GHz CMOS image-reject low noise amplifier
نویسندگان
چکیده
In this paper, a new image-reject low noise amplifier is designed for the 2.4 GHz industrial-scientific-medical (ISM) band. An inter-stage T-structure filter is used in the low noise amplifier design to provide 35-dB image rejection. The goal of this design is to merge the image-reject function into the low noise amplifier.
منابع مشابه
Analysis and design of a CMOS current reused cascaded distributed amplifier with optimum noise performance
In this paper, analysis, simulation and design of a distributed amplifier (DA) with 0.13µm CMOS technology in the frequency range of 3-40 GHz is presented. Gain cell is a current reused circuit which is optimum in gain, noise figure, bandwidth and also power dissipation. To improve the noise performance in the frequency range of interest, a T-matching low pass filter LC network which is utilize...
متن کاملAn Ultra-Low-Voltage and Ultra-Low-Power 2.4 GHz LNA Design
In this paper, ultra-low-voltage and ultra-lowpower circuit techniques are presented for CMOS RF front-ends. By employing a modified current-reused architecture, the low-noise amplifier (LNA) can operate at a very low supply voltage with microwatt power consumption while maintaining reasonable circuit performance at 2.4 GHz. Using a TSMC 0.18 um CMOS process, from the simulation results, the fu...
متن کاملA Broadband Low Power CMOS LNA for 3.1–10.6 GHz UWB Receivers
A new approach for designing an ultra wideband (UWB) CMOS low noise amplifier (LNA) is presented. The aim of this design is to achieve a low noise figure, reasonable power gain and low power consumption in 3.1-10.6 GHz. Also, the figure of merit (FOM) is significantly improved at 180nm technology compared to the other state-of-the-art designs. Improved π-network and T-network are used to obt...
متن کاملDesign of a New Low-Power 2.4 GHz CMOS LNA
A 2.4-GHz single-stage CMOS low noise amplifier (LNA) structure with ultra low power consumption is proposed. A current reuse technique is used to decrease power dissipation with increasing amplifier transconductance for the LNA. Thus, the same amplifier transconductance for the LNA will be achieved at decreased power dissipation. Also, due to the use of an inverter-type amplifier which has a s...
متن کاملA 2.4-Ghz Differential Low-noise Amplifiers using 0.18um CMOS Technology
A 2.4-GHz inductive degenerate differential narrowband low-noise amplifiers (LNAs) using 0.18um CMOS Technology are presented in this paper. The LNA is properly biased operates at 1.8 volts power supply and perfectly matched input impudence of 50 ohms. The LNA has the Noise figure <2.5dB, Gain(S21) >20dB,Input impedance (S11) <-20dB, Output impedance (S22) <-10dB,IIP3>-10dBm.
متن کامل